Parameter | Description |
Enable Static Routing | Check/uncheck to disable/enable the NAT function. |
Destination LAN IP | Enter the IP Address of the destination LAN. |
Subnet Mask | Enter the Subnet Mask of the destination LAN. |
Default Gateway | This is the gateway IP Address where packets are sent. Input |
| the gateway IP Address. |
Hop Count | Enter the maximum number of steps between network nodes |
| that data packets will travel. A node is any device on the |
| network, such as a computer, print server, or router. |
Interface | This interface tells you whether the Destination IP Address is on |
| the LAN & Wireless (Ethernet and wireless networks) or the |
| WAN (Internet). |
Add | Click on Add to add the routing rule to Router’s routing table. |
Reset | You can also click ‘Reset’ button to clear all data you entered. |
|
|
From the Current Static Routing Table, you can check each Static Routing setting.
Parameter | Description |
Delete | If you want to delete a setting, check the ‘select’ box of the |
| setting you want to delete, then click ‘Delete’ button. (You can |
| select more than one setting). |
Delete All | If you want to delete all settings listed here, please click ‘Delete |
| All’ button. |
| 35 |