Airlink101 AR570W user manual WPA Unicast Cipher Suite, Pre-shared Key Format

Page 41

change the encryption key frequently. So the encryption key is not easy to be broken by hackers. This can improve security very much.

Select “WPA Pre-share Key” for the “Encryption” mode if you wish to use WPA-PSK or WPA2- PSK to encrypt your wireless network.

Parameters

Description

WPA Unicast Cipher Suite

Available options are: WPA (TKIP), WPA2 (AES), and WPA2

 

Mixed. WPA2 (Mixed) support both WPA-PSK(TKIP/AES) and

 

WPA2-PSK(TKIP/AES). Please make sure your wireless client

 

supports the cipher you selected.

Pre-shared Key Format

You may select Passphrase (alphanumeric format) or Hex (in the

 

“A-F”, “a-f” and “0-9” range) to be the Pre-shared Key.

Pre-shared Key

The Pre-shared key is used to authenticate and encrypt data

 

transmitted in the wireless network. You may create your own

 

key here for wireless clients to connect to your router.

 

 

3.2.2.3 WPA RADIUS

IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this wireless router before accessing the wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not encryption the data during communication.

Select “WPA RADIUS” for the “Encryption” mode if you wish to use WPA RADIUS to encrypt your wireless network.

42

Image 41
Contents Wireless N 150 Router Federal Communication Commission Interference Statement Table of Contents Troubleshooting Technical Support Router Interface FeaturesPackage Contents Back Panel WPS Using EZ Setup Wizard Installing the RouterPage Page Dynamic IP Cable Modem users Page Page Congratulations! Your router configuration has been finished Connecting to the Router Wirelessly Page Using Web Configuration Utility Page Enable NTP Update Setup WizardCurrent Time Time ZoneDaylight Savings Time Server AddressHost Name MAC AddressUser Name Primary DNSSecondary DNS Service Name PasswordConnection Type Idle Time OutPptp Gateway PptpBEZEQ-ISRAEL Connection IDUser Name Please input user name assigned by Telstra L2TP GatewayParameterDescription Associated Clients Channel NumberWPA2Mixed Page 2 LAN Network1 WAN Subnet Mask IP address802.1d Spanning Tree Dhcp ServerLease Time Enable Static Dhcp LeasesDhcp Client Start IP Dhcp Client End IPNAT / Static Routing Default Gateway Enable Static RoutingReset Destination LAN IPDynamic DNS Reset You can also click ‘Reset’ button unselect allDdns Account Password/KeyProvider Band WirelessBasic Settings Show Active Clients Wireless SecuritySee 3.2.2.1 to 3.2.2.3 for each encryption type Enable 802.1x AuthenticationEncryption Key Length Default Tx KeyKey Format Encryption Key 1~4Pre-shared Key WPA Unicast Cipher SuitePre-shared Key Format MAC Control Radius Server PasswordRadius Server IP Address Radius Server PortClear Enable MAC ControlComment Fragment Threshold Advanced SettingsRTS Threshold Tx PowerBeacon Interval Dtim Period5 WPS Page Config Mode Enable WPSWi-Fi Protected Setup Information Configure by Pin Code Configure by Push ButtonVirtual Server Port Forwarding Application & GamingCurrent Virtual Server Table Special Applications Port TriggeringPublic Port TCP/UDP Port to Open Enable Special ApplicationsPopular Application Add in red box3 DMZ Public IP Enable DMZClient PC IP address Current DMZ TableReset You can also click ‘Reset’ button to unselect all ALG Settings5 QoS Total Download Bandwidth Enable QoSTotal Upload Bandwidth Current QoS TableBandwidth Rule NameLocal IP Address Local Port RangeProtocol Enable IP & Port Filtering Access Restrictions1 IP & Port Filtering Deny/AllowPort Range Client ServiceClient PC Description MAC Filtering 3 URL/Keyword Filtering Enable MAC FilteringClient PC MAC Address Current MAC Filtering TableCurrent URL Blocking Table Enable URL FilteringURL/Keyword Firewall SecurityDoS Denial-of-Service Ping of Death IPsec pass through VPN Pass throughPptp pass through L2TP pass throughTime AdministrationNew Password Current PasswordConfirmed Password ManagementReset Reboot Remote Management Firmware Upgrade Backup Settings Configuration SettingsRestore Settings Restore to Factory DefaultRefresh 6 LogSave Statistics Status Wlan Wireless LAN StatusInternet Connection Status LAN StatusSystem Status Troubleshooting Technical Support