Airlink101 AR570W user manual Primary DNS, Secondary DNS, User Name

Page 21

Primary DNS	Please input the IP address of DNS server provided by your
	service provider.
Secondary DNS	Please input the IP address of another DNS server provided by
	your service provider, this is optional.

PPPoE (for DSL users)

For DSL users, your Internet type is either Dynamic IP or PPPoE. If you are not sure which one you have, it is suggested to select PPPoE for your WAN type, and if you cannot connect to the Internet after the Setup Wizard finished, go through the Setup Wizard again and select Dynamic IP. Otherwise, you can call your ISP to confirm which Internet type you have.

Click on PPPoE for your WAN type. Enter your user name and password provided by your ISP. Click NEXT.

Note: Depending on the ISP, you may need to include the domain name with your username.

Example: username@sbcglobal.net

Parameter	Description
User Name	Please input user name assigned by your Internet service
	provider here.
	22

Image 21

Contents Wireless N 150 Router Federal Communication Commission Interference Statement Table of Contents Troubleshooting Technical Support Features Package ContentsRouter Interface Back Panel WPS Using EZ Setup Wizard Installing the RouterPage Page Dynamic IP Cable Modem users Page Page Congratulations! Your router configuration has been finished Connecting to the Router Wirelessly Page Using Web Configuration Utility Page Enable NTP Update Setup WizardCurrent Time Time ZoneDaylight Savings Time Server AddressHost Name MAC AddressPrimary DNS Secondary DNSUser Name Service Name PasswordConnection Type Idle Time OutPptp Gateway PptpBEZEQ-ISRAEL Connection IDUser Name Please input user name assigned by Telstra L2TP GatewayParameterDescription Associated Clients Channel NumberWPA2Mixed Page Network 1 WAN2 LAN Subnet Mask IP address802.1d Spanning Tree Dhcp ServerLease Time Enable Static Dhcp LeasesDhcp Client Start IP Dhcp Client End IPNAT / Static Routing Default Gateway Enable Static RoutingReset Destination LAN IPReset You can also click ‘Reset’ button unselect all DdnsDynamic DNS Password/Key ProviderAccount Wireless Basic SettingsBand Show Active Clients Wireless SecurityEnable 802.1x Authentication EncryptionSee 3.2.2.1 to 3.2.2.3 for each encryption type Key Length Default Tx KeyKey Format Encryption Key 1~4WPA Unicast Cipher Suite Pre-shared Key FormatPre-shared Key MAC Control Radius Server PasswordRadius Server IP Address Radius Server PortEnable MAC Control CommentClear Fragment Threshold Advanced SettingsRTS Threshold Tx PowerBeacon Interval Dtim Period5 WPS Page Enable WPS Wi-Fi Protected Setup InformationConfig Mode Configure by Pin Code Configure by Push ButtonVirtual Server Port Forwarding Application & GamingSpecial Applications Port Triggering Public PortCurrent Virtual Server Table TCP/UDP Port to Open Enable Special ApplicationsPopular Application Add in red box3 DMZ Public IP Enable DMZClient PC IP address Current DMZ TableReset You can also click ‘Reset’ button to unselect all ALG Settings5 QoS Total Download Bandwidth Enable QoSTotal Upload Bandwidth Current QoS TableBandwidth Rule NameLocal IP Address Local Port RangeProtocol Enable IP & Port Filtering Access Restrictions1 IP & Port Filtering Deny/AllowClient Service Client PC DescriptionPort Range MAC Filtering 3 URL/Keyword Filtering Enable MAC FilteringClient PC MAC Address Current MAC Filtering TableEnable URL Filtering URL/KeywordCurrent URL Blocking Table Firewall SecurityDoS Denial-of-Service Ping of Death IPsec pass through VPN Pass throughPptp pass through L2TP pass throughTime AdministrationNew Password Current PasswordConfirmed Password ManagementReset Reboot Remote Management Firmware Upgrade Backup Settings Configuration SettingsRestore Settings Restore to Factory Default6 Log SaveRefresh Statistics Status Wlan Wireless LAN StatusInternet Connection Status LAN StatusSystem Status Troubleshooting Technical Support