Airlink101 AR570W user manual L2TP Gateway, User Name Please input user name assigned by Telstra

Page 25

Parameter

Description

User Name

Please input user name assigned by your Internet service

 

provider here.

Password

Please input the password assigned by your Internet service

 

provider here.

L2TP Gateway

Please input the IP address of L2TP gateway

 

assigned by your Internet service provider here.

MTU

Please input the MTU value of your network connection here. If

 

you don’t know, you can use default value.

Connection Type

Please select the connection type of Internet connection you

 

wish to use, please refer to last section for detailed descriptions.

Idle Time Out

Please input the idle time out of Internet connection you wish to

 

use, and refer to last section for detailed descriptions.

When you finish with all settings, please click NEXT.

Telstra Big Pond

This setting only works when you are using Telstra Big Pond’s network service in Australia. You need to input:

ParameterDescription

User Name

Please input user name assigned by Telstra.

26

Image 25
Contents Wireless N 150 Router Federal Communication Commission Interference Statement Table of Contents Troubleshooting Technical Support Package Contents FeaturesRouter Interface Back Panel WPS Using EZ Setup Wizard Installing the RouterPage Page Dynamic IP Cable Modem users Page Page Congratulations! Your router configuration has been finished Connecting to the Router Wirelessly Page Using Web Configuration Utility Page Enable NTP Update Setup WizardCurrent Time Time ZoneDaylight Savings Time Server AddressHost Name MAC AddressSecondary DNS Primary DNSUser Name Service Name PasswordConnection Type Idle Time OutPptp Gateway PptpBEZEQ-ISRAEL Connection IDUser Name Please input user name assigned by Telstra L2TP GatewayParameterDescription Associated Clients Channel NumberWPA2Mixed Page 1 WAN Network2 LAN Subnet Mask IP address802.1d Spanning Tree Dhcp ServerLease Time Enable Static Dhcp LeasesDhcp Client Start IP Dhcp Client End IPNAT / Static Routing Default Gateway Enable Static RoutingReset Destination LAN IPDdns Reset You can also click ‘Reset’ button unselect allDynamic DNS Provider Password/KeyAccount Basic Settings WirelessBand Show Active Clients Wireless SecurityEncryption Enable 802.1x AuthenticationSee 3.2.2.1 to 3.2.2.3 for each encryption type Key Length Default Tx KeyKey Format Encryption Key 1~4Pre-shared Key Format WPA Unicast Cipher SuitePre-shared Key MAC Control Radius Server PasswordRadius Server IP Address Radius Server PortComment Enable MAC ControlClear Fragment Threshold Advanced SettingsRTS Threshold Tx PowerBeacon Interval Dtim Period5 WPS Page Wi-Fi Protected Setup Information Enable WPSConfig Mode Configure by Pin Code Configure by Push ButtonVirtual Server Port Forwarding Application & GamingPublic Port Special Applications Port TriggeringCurrent Virtual Server Table TCP/UDP Port to Open Enable Special ApplicationsPopular Application Add in red box3 DMZ Public IP Enable DMZClient PC IP address Current DMZ TableReset You can also click ‘Reset’ button to unselect all ALG Settings5 QoS Total Download Bandwidth Enable QoSTotal Upload Bandwidth Current QoS TableBandwidth Rule NameLocal IP Address Local Port RangeProtocol Enable IP & Port Filtering Access Restrictions1 IP & Port Filtering Deny/AllowClient PC Description Client ServicePort Range MAC Filtering 3 URL/Keyword Filtering Enable MAC FilteringClient PC MAC Address Current MAC Filtering TableURL/Keyword Enable URL FilteringCurrent URL Blocking Table Firewall SecurityDoS Denial-of-Service Ping of Death IPsec pass through VPN Pass throughPptp pass through L2TP pass throughTime AdministrationNew Password Current PasswordConfirmed Password ManagementReset Reboot Remote Management Firmware Upgrade Backup Settings Configuration SettingsRestore Settings Restore to Factory DefaultSave 6 LogRefresh Statistics Status Wlan Wireless LAN StatusInternet Connection Status LAN StatusSystem Status Troubleshooting Technical Support