Airlink101 AR570W user manual Wireless Security, Show Active Clients

SSID	airlink101	This is the name of your wireless network. You can type
		any alphanumerical characters here, maximum 32
		characters. SSID is used to identify your own wireless
		router from others when there are other wireless routers
		in the same area. It’s recommended to change default
		SSID value to the one which is meaningful to you, like
		myhome, office_room1, etc.
Channel Number	6	Please select a channel from the dropdown list of
		‘Channel Number’ for broadcasting. You can choose any
		channel number you want to use, and almost all wireless
		clients can locate the channel you’re using automatically
		without any problem. However, it’s still useful to
		remember the channel number you use, some wireless
		client supports manual channel number select, and this
		would help in certain scenario when there is some radio
		communication problem.
Show Active Clients		Click “Show Active Clients” button, then an “Active
		Wireless Client Table” will pop up. You can see the
		status of all active wireless clients that are connecting to
		the Router.

After you finish with all settings, please click “Apply” button.

If you want to reset all settings in this page, please click “Cancel” button.

After you clicked Apply, the following message will be displayed on your web browser:

You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting).

3.2.2 Wireless Security

The AR570W Wireless 150 Router provides complete wireless LAN security functions, including WEP, IEEE 802.11x, WPA2/WPA-PSK and WPA with RADIUS. With these security functions, you can prevent your wireless LAN from illegal access. Please make sure your wireless clients use the same security settings.

39