Radio Shack PRO-433 quick start Replacing the fuse

Page 15

The Basics

Indicates the search direction during a chain, direct, or service search, and normal and weather scan.

ALERT

Appears when the weather alert is turned on, or ﬂashes when the scanner detects an alert coded signal.

M, E or L

Indicates the trunking system: Motorola (M), EDACS (E), or LTR (L).

Indicates the current channel.

replacing the fuse

To replace your scanner’s fuse, turn off the scanner and your vehicle’s ignition, then replace the fuse only with another fuse of the same type and rating (1-amp, fast-acting glass fuse).

Image 15

Contents Quick Start PRO-433 1,000 ch Trunking Desktop/Mobile ScannerTrunking operations Contents Quick startBasics Beyond the basicsContents Special featuresCare Vehicle mounting Installing your scannerQuick start Base stationPower your scanner When mounting in your dashboard, you will need toWall outlet Connect your scanner Vehicle cigarette lighter or power portIf you are not experienced in connecting accessories to Vehicle fuse box, use a certiﬁed installerInternal speaker Connecting an external speaker mutes the scanner’sAntenna External speakerCopying / moving frequencies Quick Start Setting up your scannerTurning on your scanner Storing frequencies in channelsSearching for frequencies Scanning Earphones / headphonesQuick Start Monitoring and scanning MonitoringBasics Trunk Basics Your scanner’s controlsPGM Your scanner’s displayScan Replacing the fuse Priority channels Appears when you activate the priority featureBeyond the basics Channel-storage banksAt least one bank must be active. If you disable all Banks, the error tone beepsBeyond the Basics Chain search Service bank search It can take several minutes to search all the serviceWeather search and alert Fips codes Beyond the Basics Skywarn Turn off the data skip feature if it is on Beyond the Basics Signal StalkerData skip Memory lock DelayUsing the memory lock does not prevent the scanner from KeytonesProgramming trunked frequencies Trunking operationsStoring talk group IDs Talk group IDCannot remove all of them Scanning a talk group ID listLocking out a talk group ID One of the ten scan lists must always be active. YouPriority talk group ID scanning Monitoring a talk group IDLocked out Talk group ID search range Edacs Trunking Operations AFS FormatStatus Bit S-Bit Ignore You cannot use partial talk groups in decimal modeType I and hybrid trunked systems Trunking Operations Trunk search and scanPreset ﬂeet maps Programming a ﬂeet map Programming base and offset frequencies For Motorolla Type II, instead of selecting the size blockEnter size code S-0 Motorola disconnect tone detect function Scanner cloning Special featuresSeconds, T-Err appears and wired programming stops PC programmingSpecial Features Care TroubleshootingLeave it on until CLEAr stops ﬂashing Resetting the scannerService and repair To ensure that the scanner clears its memory properlySpeciﬁcations SpeciﬁcationsUBZZ01345ZA0