Radio Shack PRO-433 Priority talk group ID scanning, Monitoring a talk group ID, Locked out

Page 27

Trunking Operations

2. When the selected trunked system is displayed, press E/PGM.

3. Use or to choose Id Lout, and press E/PGM.

4. Press L/O, the ID is unlocked and the next locked ID displays.

5. If you unlocked all locked IDs, the scanner displays Non.

To unlock all talk group IDs, hold L/O untill you hear two beeps.

priority talk group ID scanning

Your scanner checks priority IDs more frequently than the other IDs. Each group ID list can have one priority ID, and the priority talk group ID in List 1 has the highest priority of all.

To turn priority ID scanning on or off, press PRI during ID scanning or manual operation. PRI appears when priority scanning is on.

To designate a priority ID, press and hold PRI. P appears.

NOTE	Priority ID scanning does not operate if the priority IDs are

	locked out.

monitoring a talk group ID

Your scanner displays activity for talk group IDs. You cannot hear conversations in this mode, but it is an excellent way to determine which talk group IDs are the most active.

To monitor a talk group ID, complete the following steps:

1. Hold down SRCH until you hear two short beeps. SRCH ﬂashes, and all active group IDs appear in succession.

2. Press HOLD/RESUME. HOLD appears and the scanner stays on the current ID.

3. If you want to listen to (and hold) a different ID, use the number keys to enter that ID.

4. Press . HOLD ﬂashes, then the scanner monitors the ID.

To stop monitoring the ID, press HOLD/RESUME.

27

Image 27

Contents Quick Start PRO-433 1,000 ch Trunking Desktop/Mobile ScannerTrunking operations Contents Quick startBasics Beyond the basicsContents Special featuresCare Vehicle mounting Installing your scannerQuick start Base stationPower your scanner When mounting in your dashboard, you will need toWall outlet Connect your scanner Vehicle cigarette lighter or power portIf you are not experienced in connecting accessories to Vehicle fuse box, use a certiﬁed installerInternal speaker Connecting an external speaker mutes the scanner’sAntenna External speakerCopying / moving frequencies Quick Start Setting up your scannerTurning on your scanner Storing frequencies in channelsSearching for frequencies Scanning Earphones / headphonesQuick Start Monitoring and scanning MonitoringBasics Trunk Basics Your scanner’s controlsPGM Your scanner’s displayScan Replacing the fuse Priority channels Appears when you activate the priority featureBeyond the basics Channel-storage banksAt least one bank must be active. If you disable all Banks, the error tone beepsBeyond the Basics Chain search Service bank search It can take several minutes to search all the serviceWeather search and alert Fips codes Beyond the Basics Skywarn Turn off the data skip feature if it is on Beyond the Basics Signal StalkerData skip Memory lock DelayUsing the memory lock does not prevent the scanner from KeytonesProgramming trunked frequencies Trunking operationsStoring talk group IDs Talk group IDCannot remove all of them Scanning a talk group ID listLocking out a talk group ID One of the ten scan lists must always be active. YouPriority talk group ID scanning Monitoring a talk group IDLocked out Talk group ID search range Edacs Trunking Operations AFS FormatStatus Bit S-Bit Ignore You cannot use partial talk groups in decimal modeType I and hybrid trunked systems Trunking Operations Trunk search and scanPreset ﬂeet maps Programming a ﬂeet map Programming base and offset frequencies For Motorolla Type II, instead of selecting the size blockEnter size code S-0 Motorola disconnect tone detect function Scanner cloning Special featuresSeconds, T-Err appears and wired programming stops PC programmingSpecial Features Care TroubleshootingLeave it on until CLEAr stops ﬂashing Resetting the scannerService and repair To ensure that the scanner clears its memory properlySpeciﬁcations SpeciﬁcationsUBZZ01345ZA0