Radio Shack PRO-433 quick start Keytones, Delay, Memory lock, Scanning channels

Page 23

Beyond the Basics

5. Press MENU to exit the menu mode.

keytones

The keytones feature beeps when you press a button on the scanner. To modify keytone settings, complete the following steps:

1.	Press MENU.
2.	Press or to until bEEP appears in the display, then press
	E/PGM.

3. Press or to select OFF or ON, then press E/PGM.

4. Press MENU to exit the menu mode.

delay

When the delay feature is active, the scanner automatically monitors channel frequency for an additional 2 seconds after a transmission stops before resuming scanning or searching.

To access the delay, press . /CLR /DELAY while the scanner is monitoring a channel, scanning, or searching. DLY appears when the delay is active and disappears when inactive.

Signal Stalker I also has a delay feature. It’s delay time NOTE is 10 seconds. See “Signal Stalker I” for how to program

Signal Stalker I Delay.

memory lock

The memory lock feature protects the scanner from accidental program changes.

To turn on the memory lock, hold down DM/M-LOCKuntil M- LOCK appears. To turn it off, hold down DM/M-LOCKuntil M-LOCK disappears. When the scanner is locked, it beeps an error tone if you try to program a frequency or talk group ID.

	NOTE	Using the memory lock does not prevent the scanner from
	NOTE	scanning channels.
		scanning channels.

23

Image 23

Contents Quick Start PRO-433 1,000 ch Trunking Desktop/Mobile ScannerTrunking operations Contents Quick startBasics Beyond the basicsCare ContentsSpecial features Vehicle mounting Installing your scannerQuick start Base stationWall outlet Power your scannerWhen mounting in your dashboard, you will need to Connect your scanner Vehicle cigarette lighter or power portIf you are not experienced in connecting accessories to Vehicle fuse box, use a certiﬁed installerInternal speaker Connecting an external speaker mutes the scanner’sAntenna External speakerCopying / moving frequencies Quick Start Setting up your scannerTurning on your scanner Storing frequencies in channelsSearching for frequencies Scanning Earphones / headphonesQuick Start Monitoring and scanning MonitoringBasics Trunk Basics Your scanner’s controlsPGM Your scanner’s displayScan Replacing the fuse Priority channels Appears when you activate the priority featureBeyond the basics Channel-storage banksBeyond the Basics Chain search At least one bank must be active. If you disable allBanks, the error tone beeps Weather search and alert Service bank searchIt can take several minutes to search all the service Fips codes Beyond the Basics Skywarn Turn off the data skip feature if it is on Beyond the Basics Signal StalkerData skip Memory lock DelayUsing the memory lock does not prevent the scanner from KeytonesProgramming trunked frequencies Trunking operationsStoring talk group IDs Talk group IDCannot remove all of them Scanning a talk group ID listLocking out a talk group ID One of the ten scan lists must always be active. YouLocked out Priority talk group ID scanningMonitoring a talk group ID Talk group ID search range Edacs Trunking Operations AFS FormatStatus Bit S-Bit Ignore You cannot use partial talk groups in decimal modeType I and hybrid trunked systems Trunking Operations Trunk search and scanPreset ﬂeet maps Programming a ﬂeet map Enter size code S-0 Programming base and offset frequenciesFor Motorolla Type II, instead of selecting the size block Motorola disconnect tone detect function Scanner cloning Special featuresSeconds, T-Err appears and wired programming stops PC programmingSpecial Features Care TroubleshootingLeave it on until CLEAr stops ﬂashing Resetting the scannerService and repair To ensure that the scanner clears its memory properlySpeciﬁcations SpeciﬁcationsUBZZ01345ZA0