Yamaha DPX-1200 manual Specifications, Optical, Controls, General

Specifications

• Optical

Projection mode

DLPTM (DMDTM) type, 1280 X 720 pixels, 0.8 inch

Lens

f=24.3 – 38.9 mm F=2.7 – 5.0, Electronic zoom(x 1.6), Electronic focus, Electronic lens shift

Lamp

270 W SHP lamp

Screen size

60–200 inch (16:9)

Brightness

800 – 400 ANSI lm (depends on Iris Setting)

Contrast

2500:1 to 5000:1 (depends on Iris Setting)

• Input

Color system

NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60

VIDEO

Composite signal

1Vp-p/75 Ω, Negative sync

S VIDEO

S-Video signal

Y:1Vp-p/75 Ω, Negative sync

C:0.286 or 0.3Vp-p/75 Ω

D4 VIDEO

Component signal

Y with sync:1Vp-p/75 Ω, Negative sync

(480i, 576i, 480p, 576p)

Y with sync:1Vp-p/75 Ω, 3 values sync

(1035i, 1080i, 720p)

PB/CB, PR/CR:0.7Vp-p/75 Ω

INPUT A/INPUT B

Component signal

Y with sync:1Vp-p/75 W, Negative sync (480i, 576i, 480p, 576p)

Y with sync:1Vp-p/75 W, 3 values sync (1035i, 1080i, 720p)

PB/CB, PR/CR:0.7Vp-p/75 Ω

RGB signal

G with sync:1Vp-p/75 Ω, Negative sync

(480i, 576i, 480p, 576p)

G with sync:1Vp-p/75 Ω, 3 values sync

(1035i, 1080i, 720p)

G:0.7Vp-p/75 Ω

(When using HD/VD or SYNC)

B, R:0.7Vp-p/75 Ω

HD, VD:1–5Vp-p/2.2kΩ, positive and negative sync

SYNC:2Vp-p/2.2kΩ, Negative sync (with video signals) (480i, 576i)

SYNC:0.6–5Vp-p/2.2kΩ, Negative sync (without video signals)

(480i, 576i, 480p, 576p)

HDMI

Digital RGB/component signal

• Controls

Remote

RS-232C (D-sub 9 pins)

Trigger

+12 V/Max 200 mA when the power is on

Wireless remote

1 in front, 1 at rear

Wired remote

1 input jack, 1 output jack

• General

Usable temperature range

5 °C – 35 °C

Usable humidity range

30 % – 85 %(There should be no condensation)

Power supply

AC100 – 120 V/220 – 240 V, 50/60 Hz

Power consumption

375 W

Power consumption in standby mode

0.1 W – 0.2 W

Noise level

30 dB(Standard mode), 28 dB(When Lamp Power Mode is set to 80)

Dimension

495(W) x 192.6(H) x 465.4(D) mm

Weight

13.8 kg