|
|
| Message display |
|
| ||
|
|
|
|
| Message |
| Condition |
|
|
|
|
| No Signal |
| The unit is not receiving or detecting any signal at the selected input jack. This message is |
|
|
| displayed together with the name of the input source selected with the INPUT button. |
|
|
|
|
| INPUT A (Component) (Example) |
| The input name selected by the INPUT button is displayed. It will turn off 2 seconds after |
|
|
| the signal has been input. |
|
|
|
|
| Out Of Range |
| The unit is not able to decode the PC or HDMI signal currently being input. |
|
|
|
|
| Unknown Format |
| The unit is not able to decode the video signal currently being input. |
|
|
|
|
| Auto Sync... |
| The unit is setting itself to the most appropriate configuration for the RGB signal currently |
|
|
| being received. |
|
|
|
|
| Memory |
| The memory setting number is displayed for two seconds. |
|
|
|
|
| The lamps has reached its recommended |
| This message is displayed when the power switch is turned on if the lamp running time |
| replacement time. Please replace with a new |
| exceeds 2000 hours. Press the ESCAPE button to remove the message. |
| one. |
|
|
|
|
|
|
| Press again to enter standby. |
| Press the STANDBY/ON button once more to place the unit in standby mode. |
|
|
|
|
| Lens Adjustment is locked. |
| This message will display for two seconds if you press the V. POS, ZOOM, or FOCUS |
|
|
| button when [Lens Adjustment Lock] is set to [On]. |
|
|
|
|
| Invalid Operation |
| Appears in the menu operation guide when you press an invalid button during menu |
|
|
| operation. This message displays for two seconds. |
|
|
|
|
60