Peerless Industries PRG-UNV-S, PRG-UNV-W manual Installation to Threaded Rod

Installation to Threaded Rod

(Not evaluated by UL - Professional installation only)

4Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.

1/4-20 THREADED ROD (NOT INCLUDED)

	1/4-20
	THREADED
	ROD (NOT
	INCLUDED)
1/4-20 HEX THIN
NYLON-INSERT
LOCKNUT (NOT	1/4-20 HEX
INCLUDED)
	THIN NYLON-
	INSERT
	LOCKNUT
ARROW	(NOT
	INCLUDED)
INDICATES
FRONT OF
MOUNT

fig. 4.1

fig. 4.2

ARROW INDICATES FRONT OF MOUNT

A

1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)

A

1/4-20 HEX THIN NYLON- INSERT LOCKNUT (NOT INCLUDED)

8 of 51 ISSUED: 09-30-09 SHEET #: 056-9024-5 07-18-11