Brother HL-660 manual Chapter Paper Handling, Paper Specifications

Page 19

English

CHAPTER 2 PAPER HANDLING

CHAPTER 2

PAPER HANDLING

PAPER SPECIFICATIONS

The printer can handle paper that conforms to the following specifications.

Paper Type

Paper Size

Paper Weight

Sheet

Manual

 

 

 

Feeder

 

Cut sheet

A4, Letter, Legal, B5, A5,

 

 

Executive, Custom size

60-135 g/m2

 

 

 

70-216 x 127-356 mm,

(16-36 lbs)

 

 

 

2.75”-8.5” x 5”-14” inches

 

 

 

Envelopes

DL, C5, COM-10,

 

 

Monarch

 

 

 

Organizer

Day-Timer®J,K,L,M

 

 

70-216 x 127-356mm

 

 

 

 

2.75”-8.5” x 5”-11” inches

 

 

 

Labels

70-216 x 127-356 mm,

 

 

Trans-

2.75”-8.5” x 5”-14” inches

 

 

parencies

 

 

 

 

Paper Capacity in Feeder Multi-purpose

Sheet Feeder : Up to 22 mm (0.87 inch) in Height ( below the mark . ) Approx. 200 sheets of 75 g/m2 (20 lbs) A4/Letter paper or 10 envelopes

Output Tray : Approx. 100 sheets of 75 g/m2 (20 lbs) A4/Letter paper

Remarks It is recommended that you test paper, especially special sizes and types of paper, on this printer before purchasing large quantities.

Avoid feeding labels with carrier sheets exposed or your printer will be damaged.

Use a recommended type of paper, especially plain paper and transparencies, for optimum printing. For more information on paper specifications, consult your nearest authorized sales representative or the place where you purchased your printer.

We recommend you use labels or transparencies which are designed for laser printers.

We recommend you use long-grained paper for the best print quality.

If the paper will not load from the multi-purpose sheet feeder, use the manual feed slot and try again.

2–1

Image 19
Contents Brother Laser Printer HL-660 SeriesShipment of the Printer For USA & Canada Only Laser Printer HL-660 Series User’s GuideCompilation and Publication Notice TrademarksTable of Contents Options Regulations Laser Safety For 110-120 V Model OnlyRadio Interference For 220 240 V Model Only FDA Regulations For Your SafetyDisconnect device IEC 825 Laser Class For 220-240 V Model OnlyManufactured at Important For U.K. only Canadian Department of Communications Compliance StatementEnglish About the Guidebooks Learning How to Use the PrinterDefinitions of Warnings, Cautions, and Notes Printer Overview About Your PrinterDpi Resolution and 6ppm Printing Speed FeaturesBi-Directional Parallel Interface APT Advanced Photoscale Technology Operating and Storage Environment Power SupplyEnvironment English Chapter Paper Handling Paper SpecificationsFan the Paper Straighten the Paper Printable Area MULTI-PURPOSE Sheet Feeder Opening the Feeder Loading Paper or Envelope in the Feeder Loading Paper into the FeederMoving the Paper Guide Closing the Feeder Two Side Printing Manual Duplexing Manual Feed Slot Moving the Paper Guide Opening the Output Tray Extending the Paper Support Wire Output Tray and Paper Support WireReady Lamp LampsData Lamp Alarm LampManual Lamp Select Reset Switch SwitchesSelect Switch Test Switch FF/CONTTEST SwitchReset Switch FF/CONT SwitchReprint Function Sleep ModeData Test Print ModeReset/Hex Dump Mode APT Advanced Photoscale Technology ProtectionBR-SCRIPT 2 ROM Board Chapter OptionsAppletalk Interface Board Minimum Memory Recommendation including resident memory Additional MemoryEnglish Unplug the power cord Disconnect the interface cable Installing the SimmInstall the Simm Replacing the Toner Cartridge Chapter MaintenanceRemoving the Multi-Purpose Sheet Feeder Remove the old toner cartridge from the printer Installing the Toner Cartridge Into the Drum Unit Removing the Toner Cartridge Replacing the Drum UnitInside the printer Remove the protective parts ① ⑥ in order as shown below 13 Installing the Drum Unit 14 Adjusting the Print Density Dial Adjusting the Print DensityCleaning the Printer Exterior Cleaning the Printer15 Inside the printer Cleaning the Printer Interior and Drum Unit17 Cleaning the Printer Interior 18 Cleaning the Primary Corona Wire RE-PACKING the Printer 19 Removing the Drum Unit Assembly21 Repacking the Printer English Operator Calls Alarm Indications AT a GlanceEnglish Service Calls Locating Paper Jam Position Paper JamsPaper Jam in the Feeder Paper Jam Inside the Printer Setting up the Printer for DOS Setting up the Printer HardwareSetting up the Printer for Windows Setting up the Printer for Apple Macintosh Computers Recommendations Paper HandlingPrinting White Stripes or Faint Images Print QualityDark Stripes or Toner Stains 11 Scattering Toner 13 Stained at Fixed Interval English Appendices Printer SpecificationsElectrical and Mechanical FunctionsParallel Interface Specification Fig. A-1 Parallel interface cable Intellifont Compatible Fonts Resident FontsBitmapped Fonts Scalable FontsAppendix-6 Epson Mode Symbol SETS/ Character SetsOCR Symbol Sets HP LaserJet 4 ModeHP LaserJet HP LaserJet 4, Epson FX-850, IBM Propritner XL Appendix-10 Index Simm III UL5580001