Brother HL-660 manual Paper Handling, Recommendations

English

USER’S GUIDE

Questions

I cannot print from my application software.

Recommendations

∙Check the PORT selection within the Chooser : it should match the port you physically attached the printer cable to.

∙Check the printer cable type (you should be using a Local-Talk type cable.)

Paper Handling

Questions	Recommendations
The printer does not load	∙ Note if the ALARM and PAPER lamps are
paper.	blinking. If so, the multi-purpose sheet
	feeder is out of paper. Load a new stack of
	paper into the feeder.
	∙ If there is paper in the multi-purpose sheet
	feeder, make sure it is straight. If the paper
	is curled, you should straighten it before
	printing.
	∙ Reduce the stack of paper in the multi-
	purpose sheet feeder, then try again.
The printer does not load	When the MANUAL lamp is blinking, press the
paper from the manual	FF/CONT switch for manual loading.
feed slot.	Re-insert the paper firmly.
How can I load	You can load envelopes from either the multi-
envelopes?	purpose sheet feeder or the manual feed slot.
	Your application software must be set up
	correctly to print on the envelope size you are
	using. This is usually done in the page setup or
	document setup menu of your software. Refer to
	your application manual.
What paper can I use?	You can use plain paper, envelopes,
	transparencies, labels, and organizer paper. For
	information on loading paper, see “Paper
	Handling” in Chapter 2.
How can I clear paper	See “PAPER JAMS” in this chapter.
jams?

6–10