
Setup
Ink film – installing / replacing!
Install the included ink film or replace the used ink film with new one. Model No.
Each roll prints about 140
1 | Open the front cover by pulling up the centre | Centre part | |
part. | |||
|
Front cover
2 Push the back cover open button (green) on the right side of the unit.
OR
Push the back cover open lever (green) inside of the unit.
Back cover open button ![]()
(green)
OR
Back cover
open lever (green) ![]()
![]()
![]()
3 | Open the back cover. | Back cover | |
● | For first time installation of the supplied ink | ||
|
| film, skip to step 6. |
|
4 | For replacement only |
Pull out the blue gear and remove the used |
ink film. Remove the used core.
(continued)
Blue
gear
Used core
Used ink film
12