2. Preparation
2.5 Your logo
The logo can be your company, division or name.
{MENU}
|
|
|
|
|
|
|
|
{MUTE} | {STOP} | ||
|
|
|
|
{RECALL} {<}{>}{A}{B} {SET}
1Press {MENU}.
SYSTEM SET UP
PRESS NAVI.[( )]
2Press {<} or {>} repeatedly to display the following.
YOUR LOGO
PRESS SET
3Press {SET}.
LCursor () will appear on the display.
LOGO=
4Enter your logo, up to 30 characters. See the character table on page 17 for details.
5Press {SET}.
LThe next feature will be displayed.
6Press {MENU} to exit the program.
Note:
LThis information will be printed on each page transmitted from your unit.
To enter your logo
Example: “BILL”
1.Press {2} 2 times.
LOGO=B
2.Press {4} 3 times.
LOGO=BI
3.Press {5} 3 times.
LOGO=BIL
4.Press {>} to move the cursor to the next space and press {5} 3 times.
LOGO=BILL
To change capital or lower-case letters
Pressing the {#} key will change to capital or
1.Press {2} 2 times.
LOGO=B
2.Press {4} 3 times.
LOGO=BI
3.Press {#}.
LOGO=Bi
4.Press {5} 3 times.
LOGO=Bil
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect character, and make the correction.
To delete a character
Press {<} or {>} to move the cursor to the character you want to delete and press {STOP}.
To insert a character
1.Press {<} or {>} to move the cursor to the position to the right of where you want to insert the character.
2.Press {MUTE} to insert a space and enter the character.
To select characters with the dial keypad
Keys | Characters |
|
|
|
| |||
{1} | 1 | [ | ] | { | } | + | – | / = |
| , . | _ | ` | : | ; | ? | ||
|
|
|
|
|
|
|
|
|
{2} | A | B | C | a | b | c | 2 |
|
|
|
|
|
|
|
|
|
|
{3} | D | E | F | d | e | f | 3 |
|
|
|
|
|
|
|
|
|
|
{4} | G | H | I | g | h | i | 4 |
|
|
|
|
|
|
|
|
|
|
{5} | J | K | L | j | k | l | 5 |
|
|
|
|
|
|
|
|
|
|
{6} | M | N | O | m | n | o | 6 |
|
|
|
|
|
|
|
|
| |
{7} | P | Q | R | S | p | q | r s 7 | |
|
|
|
|
|
|
|
|
|
17