Panasonic KX-FP343AL manual Important information, Instructions to customer, Installation

Page 6

Important information

Instructions to customer

Installation

Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.

Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5).

You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You may connect it in place of your existing telephone or to any spare telephone socket installed in your premises.

To disconnect your existing telephone you must first remove its plug from the line socket. You can then insert the plug of your Permitted Attachment into the socket and use your equipment.

If the plug of your existing telephone cannot be readily removed, you will have to remove the screw securing it. To do this proceed as follows:

1.Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.)

2.Remove screw “B” and withdraw the plug. (See Fig. 2.)

3.Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the socket recess. (If the screw is too long, increase the hole depth or replace the screw with one 5 mm shorter.)

4.Replace socket cover and tighten screw “A”. (See Fig. 4.)

SOCKET PLUG

SCREW “A”

 

SCREW

 

“B”

 

 

Fig. 1

 

Fig. 2

TELEPHONE CORD

)

 

Connect to the PLUG

 

( as shown in Fig. 1.

SCREW “A”

SCREW

 

SOCKET

“B”

 

Fig. 3

 

Fig. 4

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

L Disconnect the Permitted Attachment and try using the service with the normal telephone.

L If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

L If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

4

Image 6
Contents Operating Instructions How to use the operating instructions OpenLocation of controls Keys Listed in alphabetical orderFor your future reference CopyrightPage Important information InstallationService difficulties Instructions to customerImportant safety instructions Electric shock when the unit is subsequently usedSafety Instructions Distinctive Ring Included accessories Quantity SpecificationsModel No Specifications/Usage Accessory informationAvailable accessories Film againOverview Description of buttonsBOne-touch keys Installing the ink film Ink filmReplacing the ink film IncorrectPaper tray Recording paperRecording paper support Connections Handset receiver volume Adjusting volumeRinger volume Monitor volumeExample 315PM 12 hour clock entry 1. Press 03 Date and timeExample August 10, 2003 Press 08 10 To correct a mistakeYour logo Your fax number To delete a number Storing into the one-touch Dial Storing into the navigator directoryCaller ID service Viewing and calling back using caller information Editing a caller’s telephone number before calling backErasing specific caller information This feature is not available in the following casesErasing all caller information For navigator directorySending a fax manually Documents you can send Adding a new entry into the broadcast memory Broadcast transmissionProgramming entries into the broadcast memory Erasing a stored entry from the broadcast memoryTo cancel broadcast transmission Sending the same document to pre-programmed partiesTo send the same document to a one-time group of entries Mostly phone calls Selecting the way to use your fax machineUse only as a fax With answering machineActivating TEL mode Receiving a fax manuallySetting up the fax machine and an answering machine Using the unit with an answering machineActivating FAX only mode Receiving a fax automaticallyReceiving a voice message and fax document in one call Activating the junk fax prohibitorProgramming undesired callers Press Junk FAX ProhibitorPress 3 times Press SET Press Stop Using with the ring detection feature More copying features Making a copyTo collate multiple copies Example Making 2 copies of a 4-page original documentProgramming advanced features Basic featuresProgramming basic features ProgrammingAdvanced features Code #44 Setting the memory reception alert Code #31 Activating the Distinctive Ring featureCode #34 Setting the quick scan Code #46 Setting friendly receptionCode #68 Setting the Error Correction Mode ECM Code #76 Setting the connecting toneCommunication Error Code 40-42, 46-72, FF Error messages ReportsError messages Display Communication Error Code 43When a function does not work, check here GeneralCannot make and receive calls Fax sending Fax receivingIf a power failure occurs CopyingWhen the recording paper has jammed in the unit Recording paper jamWhen the recording paper was not fed into the unit properly Document feeder cleaning Do not use paper products, such as paper towels or tissuesDocument jams sending Thermal head cleaning Help Reference lists and reports Technical data about this product Paper specifications Index Index Page Page PFQX1839ZA CM0803CM0

KX-FP343AL specifications

The Panasonic KX-FP343AL is a versatile and efficient addition to your home or office, catering to all your faxing and printing needs. This all-in-one device primarily functions as a fax machine but also integrates features for copying and printing, making it a valuable asset for any workspace.

One of the standout features of the KX-FP343AL is its advanced laser printing technology. This ensures high-quality prints with sharp text and crisp images, making your documents look professional. The machine operates at speeds of up to 14 pages per minute, allowing for efficient workflow, especially beneficial in busy environments where time is precious.

In terms of fax capabilities, the KX-FP343AL boasts a high transmission speed of around 14.4 kbps, enabling quick sending and receiving of faxes. It is equipped with a 28.8 kbps modem, which increases efficiency and reduces wait times. The built-in memory can store up to 50 pages, ensuring that important documents can be saved and sent later even if the machine runs out of paper.

Another notable technology integrated into this device is the automatic document feeder (ADF). This feature allows users to load multiple pages at once, streamlining the faxing process. The KX-FP343AL includes a 150-sheet paper capacity, reducing the frequency of paper changes during busy periods.

In addition to faxing and printing, the KX-FP343AL also offers copying functionalities. Users can make quick copies without the need for additional equipment. The machine is user-friendly, thanks to a simple control panel and easy-to-follow instructions, making it accessible for users of all technical skill levels.

The Panasonic KX-FP343AL is designed with efficiency and reliability in mind. It features a compact design that saves space while ensuring durability and longevity. The device is also energy-efficient, complying with industry standards to reduce power consumption, thus benefiting both the environment and your electricity bills.

In conclusion, the Panasonic KX-FP343AL is a multifunctional device that combines faxing, copying, and printing in one compact unit. Its advanced laser technology, efficient fax transmission speeds, and user-friendly features make it an excellent choice for anyone looking to enhance productivity in their home or office setup.