Panasonic KX-FT932HK manual Activating TEL/FAX mode, Stop FAX/START, Connecting, TEL/FAX Mode

Page 22

5. Fax

LThe {AUTO ANSWER} indicator turns OFF.

{STOP}

{FAX/START}

How to receive phone calls and faxes

1.Lift the handset to answer the call.

2.When:

document reception is required,

a fax calling tone (slow beep) is heard, or

no sound is heard,

press {FAX/START}.

CONNECTING.....

LThe unit will start fax reception.

3.Replace the handset.

Note:

LIf you do not answer the call within 15 rings, the unit will temporarily switch to fax reception. The other party can then send a fax.

How to receive phone calls and faxes with an extension telephone

If you have another telephone connected to the same line (extension telephone), you can use the extension telephone to receive faxes.

1.When the extension telephone rings, lift the handset of the extension telephone.

2.When:

document reception is required,

a fax calling tone (slow beep) is heard, or

no sound is heard,

press {*}{*}{*}{9} (default fax activation code) firmly.

LThe fax machine will start fax reception.

3.Replace the handset.

Note:

LTo receive fax documents using the extension telephone, make sure remote fax activation is turned ON beforehand (feature #41 on page 28). The default setting is ON.

To stop receiving

Press {STOP}.

5.6.2 Activating TEL/FAX mode

1Make sure feature #73 is set to TEL/FAXbeforehand (page 28).

2Press {AUTO ANSWER} repeatedly to display the following.

TEL/FAX MODE

LThe {AUTO ANSWER} indicator turns OFF.

3The ringer volume setting should be ON (page 9).

{FAX/START}

How phone calls and faxes are received

1.INCOMING CALLwill be displayed but the unit will not ring.

2.The unit will wait for the duration of 2 rings before answering the call.

L The number of rings is determined by the “TEL/FAX delayed ring setting” (feature #78 on page 28).

L During this time, an extension telephone (if connected to the same line) will ring.

3.The unit will answer the call and try to detect a fax calling tone.

When a fax calling tone is detected

The unit receives the fax automatically without ringing.

When a fax calling tone is not detected

A The unit will ring. You may answer the call.

L Callers will hear a ring back tone different from the one generated by the telephone company.

L An extension telephone (if connected to the same line) will not ring at this time.

B If you do not answer the call, the unit will activate the fax function.

L Some fax machines do not generate fax calling tones when sending faxes, therefore the unit will

22

Image 22
Contents Model No.KX-FT932HK Model No.KX-FT934HK Personal FacsimileImportant Information Available accessories Included accessoriesAccessory information ConnectionsFax sending / Copying Recording paperFAX/START To send a fax Fax receivingCopy FAX/START To make a copy Press CopyFor best performance Important safety instructionsInstallation EnvironmentRoutine care Location of Controls C D E FOverview Adjusting volumeDisplay Incoming Call Your logo Dialling modeDate and time SETFlash Stopset Your FAX no Press SET Your fax numberLOGO=Bil NO.=One-touch dial feature PhonebookCaller ID service For stationsExample 10 NEW Calls 1059AM How Caller ID is displayedCaller ID FAX/START Stop Monitor Jul.20 1120AM 1345678901 Jul.20 1120AMMonitor Erasing caller informationCaller ID FAX/START Caller IDInto the phonebook Into the one-touch dialDocuments you can send Using the FINE, Super Fine and PhotoSending a fax manually Stop FAX/START MonitorStop FAX/START Lower Adding a new item into the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Erasing a stored item from the broadcast memorySelecting the way to use your fax machine Receiving a fax manually Auto answer OFFTEL/FAX Mode Activating TEL/FAX modeConnecting Stop FAX/STARTFAX only Mode Activating FAX only modeReceiving a fax automatically Auto answer on Using with the Distinctive Ring feature Stop Copy Making a copyTo stop copying Programming advanced features Basic featuresProgramming basic features ProgrammingAdvanced features LCD Contrast =NORMAL ± Connecting ToneSET Default RESET=NO ± FAX ActivationProgram code and direct command button #78 TEL/FAX ring setting #80 Set defaultCall Service Error messages ReportsError messages Display Check DocumentTransmit Error Modem ErrorPolling Error Cover OpenInitial settings When a function does not work, check hereGeneral Fax sending CONNECTING....., butFax receiving If a power failure occurs CopyingDocument jams sending Recording paper jamsFor KX-FT932 Skip to step For KX-FT934 Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissuesReference lists and reports Specifications For your future reference User recordAttach your sales receipt here Index Page Page Global web site