Panasonic KX-FT932HK manual LCD Contrast =NORMAL ±, FAX Activation, Receive Alert, Friendly RCV

Page 28

8. Programmable Features

Code #39: Changing the display contrast

LCD CONTRAST

=NORMAL [±]

“NORMAL” (default): For normal contrast.

“DARKER”: Used when the display contrast is too light.

Code #41: Changing the fax activation code

FAX ACTIVATION

=ON[±]

If you wish to use an extension telephone (page 22) to receive faxes, activate this feature and program the activation code.

1.Press {MENU}.

2.Press {#}, then {4}{1}.

3.Press {A} or {B} repeatedly to select “ON”.

4.Press {SET}.

5.Enter your code (2 to 4 digits) using the dial keys {0}–{9}, {*} and {#}.

L The default code is “;;;9”. L Do not enter “0000”.

6.Press {SET}.

7.Press {MENU}.

Code #44: Setting the memory reception alert

RECEIVE ALERT

=ON[±]

To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.

The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.

“ON” (default): You will be alerted to a reception problem by a beeping sound.

“OFF”: Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV

=ON[±]

To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep).

“ON” (default): You do not have to press {FAX/START} for fax reception.

“OFF”: You have to press {FAX/START} for fax reception.

Code #58: Setting the scan contrast

SCAN CONTRAST

=NORMAL [±]

To send or copy a document with faint or dark writing, set this feature before starting transmission or copying. “NORMAL” (default): Used for normal writing. “LIGHT”: Used for dark writing.

“DARKER”: Used for faint writing.

LThis feature is not valid if you select “PHOTO” resolution for sending (page 18) or copying (page 25) a document.

Code #59: Setting the print contrast

PRINT CONTRAST

=NORMAL [±]

To adjust the darkness of received or copied documents. “NORMAL” (default): Normal contrast.

“DARKER”: Darker contrast.

Code #73: Changing the receiving mode in the manual answer setting

MANUAL ANSWER

=TEL [±]

“TEL” (default): Telephone mode (page 21)

“TEL/FAX”: Telephone/Fax mode (page 22)

Code #76: Setting the connecting tone

CONNECTING TONE

=ON [±]

If you often have trouble when sending faxes, this feature allows you to hear connecting tones: fax tone, ring back tone and busy tone. You can use these tones to confirm the status of the other party’s machine.

“ON” (default): You will hear connecting tones.

“OFF”: Deactivates this feature.

Note:

LIf the ring back tone continues, the other party’s machine may not be a fax machine or may have run

out of paper. Check with the other party.

LThe connecting tone volume cannot be adjusted.

Code #78: Changing the TEL/FAX delayed ring setting

TEL/FAX RING

RINGS=2 [±]

If you use an extension telephone in TEL/FAX mode, select the desired number of times the extension telephone rings before the unit answers the call. You can select “1”, “2” (default), “3”, “4”, “5”, “6”, “7” “8” or “9”. See page 22 for details.

Code #80: Resetting advanced features to their default settings

SET DEFAULT

RESET=NO [±]

To reset the advanced features:

1.Press {MENU}.

2.Press {#}, then {8}{0}.

3.Press {A} or {B} repeatedly to select “YES”.

4.Press {SET}.

5.Press {SET} again.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model No.KX-FT932HK Model No.KX-FT934HK Personal FacsimileImportant Information Included accessories Accessory informationAvailable accessories ConnectionsFax sending / Copying Recording paperFAX/START Fax receiving Copy FAX/STARTTo send a fax To make a copy Press CopyImportant safety instructions InstallationFor best performance EnvironmentRoutine care Location of Controls C D E FOverview Adjusting volumeDisplay Incoming Call Dialling mode Date and timeYour logo SETFlash Stopset Your fax number LOGO=BilYour FAX no Press SET NO.=One-touch dial feature PhonebookCaller ID service For stationsHow Caller ID is displayed Caller ID FAX/START Stop MonitorExample 10 NEW Calls 1059AM Jul.20 1120AM 1345678901 Jul.20 1120AMErasing caller information Caller ID FAX/STARTMonitor Caller IDInto the phonebook Into the one-touch dialUsing the FINE, Super Fine and Photo Sending a fax manuallyDocuments you can send Stop FAX/START MonitorStop FAX/START Lower Broadcast transmission Programming items into the broadcast memoryAdding a new item into the broadcast memory Erasing a stored item from the broadcast memorySelecting the way to use your fax machine Receiving a fax manually Auto answer OFFActivating TEL/FAX mode ConnectingTEL/FAX Mode Stop FAX/STARTFAX only Mode Activating FAX only modeReceiving a fax automatically Auto answer on Using with the Distinctive Ring feature Stop Copy Making a copyTo stop copying Basic features Programming basic featuresProgramming advanced features ProgrammingAdvanced features Connecting Tone SET Default RESET=NO ±LCD Contrast =NORMAL ± FAX ActivationProgram code and direct command button #78 TEL/FAX ring setting #80 Set defaultError messages Reports Error messages DisplayCall Service Check DocumentModem Error Polling ErrorTransmit Error Cover OpenInitial settings When a function does not work, check hereGeneral Fax sending CONNECTING....., butFax receiving If a power failure occurs CopyingDocument jams sending Recording paper jamsFor KX-FT932 Skip to step For KX-FT934 Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissuesReference lists and reports Specifications For your future reference User recordAttach your sales receipt here Index Page Page Global web site
Top Page Image Contents