Panasonic KX-FT932HK manual Important safety instructions, For best performance, Installation

Page 6

2. Important Information

2.1 Important safety instructions

When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury.

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on this unit.

3.Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners.

4.Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc.

5.Place the unit securely on a stable surface. Serious damage and/or injury may result if the unit falls.

6.Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided.

7.Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

8.For safety purposes this unit is equipped with a grounded plug. If you do not have this type of outlet, please have one installed. Do not defeat this safety feature by tampering with the plug.

9.Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.

10.Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

11.Never push any objects through slots in this unit. This may result in the risk of fire or electric shock. Never spill any liquid on the unit.

12.To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorised service centre when service is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.

13.Unplug this unit from power outlets and refer servicing to an authorised service centre when the following conditions occur:

A.When the power cord is damaged or frayed.

B.If liquid has been spilled into the unit.

C.If the unit has been exposed to rain or water.

D.If the unit does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorised service centre.

E.If the unit has been dropped or physically damaged.

F.If the unit exhibits a distinct change in performance.

14.During thunderstorms, avoid using telephones except cordless types. There may be a remote risk of an electric shock from lightning.

15.Do not use this unit to report a gas leak, when in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

CAUTION:

Installation

LNever install telephone wiring during a lightning

storm.

LNever install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

LNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

LUse caution when installing or modifying telephone

lines.

LDo not touch the plug with wet hands.

WARNING:

LTo prevent the risk of fire or electrical shock, do not expose this product to rain or any type of moisture.

LUnplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised service centre.

2.2 For best performance

Environment

LKeep the unit away from electrical noise generating

devices, such as fluorescent lamps and motors.

LThe unit should be kept free from dust, high temperature and vibration.

LThe unit should not be exposed to direct sunlight. L Do not place heavy objects on top of the unit.

L The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 5 °C or greater than 35 °C. Damp basements should also be avoided.

Connection

LIf any other device is connected on the same line,

this unit may disturb the network condition of the device.

LIf you use the unit with a computer and your internet provider instructs you to install a filter (1), please connect the telephone line cord as follows.

1

6

Image 6
Contents Model No.KX-FT932HK Model No.KX-FT934HK Personal FacsimileImportant Information Available accessories Included accessoriesAccessory information ConnectionsRecording paper Fax sending / CopyingFAX/START To send a fax Fax receivingCopy FAX/START To make a copy Press CopyFor best performance Important safety instructionsInstallation EnvironmentRoutine care Location of Controls C D E FAdjusting volume OverviewDisplay Incoming Call Your logo Dialling modeDate and time SETFlash Stopset Your FAX no Press SET Your fax numberLOGO=Bil NO.=One-touch dial feature PhonebookCaller ID service For stationsExample 10 NEW Calls 1059AM How Caller ID is displayedCaller ID FAX/START Stop Monitor Jul.20 1120AM 1345678901 Jul.20 1120AMMonitor Erasing caller informationCaller ID FAX/START Caller IDInto the phonebook Into the one-touch dialDocuments you can send Using the FINE, Super Fine and PhotoSending a fax manually Stop FAX/START MonitorStop FAX/START Lower Adding a new item into the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Erasing a stored item from the broadcast memorySelecting the way to use your fax machine Receiving a fax manually Auto answer OFFTEL/FAX Mode Activating TEL/FAX modeConnecting Stop FAX/STARTActivating FAX only mode FAX only ModeReceiving a fax automatically Auto answer on Using with the Distinctive Ring feature Making a copy Stop CopyTo stop copying Programming advanced features Basic featuresProgramming basic features ProgrammingAdvanced features LCD Contrast =NORMAL ± Connecting ToneSET Default RESET=NO ± FAX ActivationProgram code and direct command button #78 TEL/FAX ring setting #80 Set defaultCall Service Error messages ReportsError messages Display Check DocumentTransmit Error Modem ErrorPolling Error Cover OpenWhen a function does not work, check here Initial settingsGeneral CONNECTING....., but Fax sendingFax receiving If a power failure occurs CopyingRecording paper jams Document jams sendingFor KX-FT932 Skip to step For KX-FT934 Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissuesReference lists and reports Specifications User record For your future referenceAttach your sales receipt here Index Page Page Global web site