Panasonic KX-FT934HK, KX-FT932HK manual Included accessories, Accessory information, Connections

Page 3

1. Installation and Quick Start

1.1 Included accessories

1 Telephone line cord

2 Handset

3 Handset cord	4 Recording paper
	(10 metres long)

5 Paper stacker	6 Operating instructions
(KX-FT934 only)

Note:

LIf any items are missing or damaged, contact the place of purchase.

LSave the original carton and packing materials for future shipping and transportation of the unit.

1.2 Accessory information

1.2.1 Available accessories

–Standard thermal recording paper*1 (KX-A106): 216 mm × 30 m roll, with 25 mm core

*1 Use only the included or specified recording paper. Using other recording paper may affect print quality and/or cause excessive wear to the thermal head.

1.3 Connections

Important:

L The unit will not function when there is a power failure. To make calls in emergency situations, you should connect a telephone that can function during a power failure to the telephone line.

1 Paper stacker (KX-FT934 only)

LThe paper stacker may not be shown in all illustrations in these operating instructions.

2Power cord

LConnect to the power outlet (220 V – 240 V, 50/60 Hz).

3Telephone line cord

LConnect to [LINE] jack and a single telephone line jack.

4[EXT] jack

LRemove the stopper if attached. 5 Handset cord

6 Extension telephone (not included)

4

1

5

23

6

Caution:

LWhen you operate this product, the power outlet should be near the product and easily

accessible.

LBe sure to use the telephone line cord included in

this unit.

LDo not extend the telephone line cord.

LKeep the unit away from walls as far as possible to prevent a recording paper jam.

Note:

LBefore you can make calls, the dialling mode setting may need to be changed (page 10).

3

Image 3

Contents Personal Facsimile Model No.KX-FT932HK Model No.KX-FT934HKImportant Information Connections Included accessoriesAccessory information Available accessoriesRecording paper Fax sending / CopyingFAX/START To make a copy Press Copy Fax receivingCopy FAX/START To send a faxEnvironment Important safety instructionsInstallation For best performanceRoutine care C D E F Location of ControlsAdjusting volume OverviewDisplay Incoming Call SET Dialling modeDate and time Your logoFlash Stopset NO.= Your fax numberLOGO=Bil Your FAX no Press SETPhonebook One-touch dial featureFor stations Caller ID serviceJul.20 1120AM 1345678901 Jul.20 1120AM How Caller ID is displayedCaller ID FAX/START Stop Monitor Example 10 NEW Calls 1059AMCaller ID Erasing caller informationCaller ID FAX/START MonitorInto the one-touch dial Into the phonebookStop FAX/START Monitor Using the FINE, Super Fine and PhotoSending a fax manually Documents you can sendStop FAX/START Lower Erasing a stored item from the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryReceiving a fax manually Auto answer OFF Selecting the way to use your fax machineStop FAX/START Activating TEL/FAX modeConnecting TEL/FAX ModeActivating FAX only mode FAX only ModeReceiving a fax automatically Auto answer on Using with the Distinctive Ring feature Making a copy Stop CopyTo stop copying Programming Basic featuresProgramming basic features Programming advanced featuresAdvanced features FAX Activation Connecting ToneSET Default RESET=NO ± LCD Contrast =NORMAL ±Program code and direct command button #80 Set default #78 TEL/FAX ring settingCheck Document Error messages ReportsError messages Display Call ServiceCover Open Modem ErrorPolling Error Transmit ErrorWhen a function does not work, check here Initial settingsGeneral CONNECTING....., but Fax sendingFax receiving Copying If a power failure occursRecording paper jams Document jams sendingFor KX-FT932 Skip to step For KX-FT934 Do not use paper products, such as paper towels or tissues Document feeder / scanner glass cleaningReference lists and reports Specifications User record For your future referenceAttach your sales receipt here Index Page Page Global web site