Panasonic KX-FT934HK, KX-FT932HK manual Advanced features

Page 27

8. Programmable Features

Code #13: Setting the dialling mode

DIALLING MODE

=TONE [±]

See page 10 for details.

Code #17: Setting the ringer type for outside calls

EXT RINGER TYPE

=RINGER 1

[±]

To set the ringer type from one of 3 types for outside calls. You can select “RINGER 1” (default), “RINGER 2” or “RINGER 3”.

8.3 Advanced features

See page 26 for how to enter advanced feature programming.

Code #22: Setting the journal report to print automatically

AUTO JOURNAL

=ON[±]

“ON” (default): The unit will print a journal report automatically after every 30 new fax transmissions and receptions (page 18).

“OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax transmissions and receptions.

Code #23: Sending documents overseas

OVERSEAS MODE

=ERROR [±]

If you cannot send a fax overseas even if the number is correct and the line is connected, activate this feature before sending the fax.

This feature improves the reliability by reducing the transmission speed.

“ERROR” (default): When the previous fax transmission fails and you wish to re-send the document.

“NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.

“OFF”: Deactivates this feature.

Note:

LThis feature is not available for broadcast transmission.

LCalling charges may be higher than usual.

Code #25: Sending a fax at a specific time

DELAYED SEND

=OFF [±]

This feature allows you to take advantage of low-cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.

To send a document:

1.Insert the document.

2.If necessary, press {A} or {B} repeatedly to select the desired resolution (page 18).

3.Press {MENU}.

4.Press {#} then {2}{5}.

5.Press {A} or {B} repeatedly to select “ON”.

6.Press {SET}.

7.Enter the fax number.

8.Press {SET}.

9.Enter the transmission start time.

LIf you select 12-hour time entry when you set the date and time (page 10), press {*} repeatedly to select “AM” or “PM”.

LIf you selected 24-hour time entry when you set the date and time (page 10), the time is set using 24-hour time entry.

10.Press {SET}.

11.Press {MENU}.

Note:

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

=OFF [±]

“ON”: The Caller ID list will be printed automatically each time the unit logs 30 different callers (page 15).

“OFF” (default): The Caller ID list will not be printed, but the unit will keep a record of the information for the last 30 different callers.

Code #31: Activating the Distinctive Ring feature

DISTINCTIVE RING

=OFF [±]

See page 24 for details.

Code #36: Receiving oversized documents

RCV REDUCTION

=ON [±]

To slightly reduce the received fax image when printing, so that the received document will be approximately the same length as the original document.

“ON” (default): The received fax image will be printed slightly smaller than the original image.

“OFF”: Deactivates this feature. The received fax image will be printed at the same size as the original image.

Note:

LA slight margin will be added to the printed documents, and therefore if this feature is turned OFF, the received document will be slightly longer than the original document.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Personal Facsimile Model No.KX-FT932HK Model No.KX-FT934HKImportant Information Connections Included accessoriesAccessory information Available accessoriesRecording paper Fax sending / CopyingFAX/START To make a copy Press Copy Fax receivingCopy FAX/START To send a faxEnvironment Important safety instructionsInstallation For best performanceRoutine care C D E F Location of ControlsAdjusting volume OverviewDisplay Incoming Call SET Dialling modeDate and time Your logoFlash Stopset NO.= Your fax numberLOGO=Bil Your FAX no Press SETPhonebook One-touch dial featureFor stations Caller ID serviceJul.20 1120AM 1345678901 Jul.20 1120AM How Caller ID is displayedCaller ID FAX/START Stop Monitor Example 10 NEW Calls 1059AMCaller ID Erasing caller informationCaller ID FAX/START MonitorInto the one-touch dial Into the phonebookStop FAX/START Monitor Using the FINE, Super Fine and PhotoSending a fax manually Documents you can sendStop FAX/START Lower Erasing a stored item from the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryReceiving a fax manually Auto answer OFF Selecting the way to use your fax machineStop FAX/START Activating TEL/FAX modeConnecting TEL/FAX ModeActivating FAX only mode FAX only ModeReceiving a fax automatically Auto answer on Using with the Distinctive Ring feature Making a copy Stop CopyTo stop copying Programming Basic featuresProgramming basic features Programming advanced featuresAdvanced features FAX Activation Connecting ToneSET Default RESET=NO ± LCD Contrast =NORMAL ±Program code and direct command button #80 Set default #78 TEL/FAX ring settingCheck Document Error messages ReportsError messages Display Call ServiceCover Open Modem ErrorPolling Error Transmit ErrorWhen a function does not work, check here Initial settingsGeneral CONNECTING....., but Fax sendingFax receiving Copying If a power failure occursRecording paper jams Document jams sendingFor KX-FT932 Skip to step For KX-FT934 Do not use paper products, such as paper towels or tissues Document feeder / scanner glass cleaningReference lists and reports Specifications User record For your future referenceAttach your sales receipt here Index Page Page Global web site
Top Page Image Contents