Panasonic KX-FT934HK, KX-FT932HK manual Copying, If a power failure occurs

Page 35

 

9. Help

 

 

 

 

Problem

Cause & Solution

The other party complains

L The receiving mode is set to TEL mode.

that they cannot send a

Receive the document manually (page 21) or change the receiving mode to

document.

TEL/FAX mode (page 22) or FAX ONLY mode (page 23).

 

L The memory is full of received documents due to a lack of recording paper

 

or a recording paper jam. Install paper (page 4) or clear the jammed paper

 

(page 36).

 

 

I cannot select the desired

L If you want to set FAX ONLY mode, press {AUTO ANSWER} repeatedly to

receiving mode.

select FAX ONLY mode.

 

L If you want to set TEL mode or TEL/FAX mode, set the desired mode using

 

#73 (page 28) and press {AUTO ANSWER} repeatedly to select the

 

desired mode.

 

L The Distinctive Ring of feature #31 is activated (page 24).

 

 

When an extension telephone

L You must set remote fax activation to ON (feature #41 on page 28)

is connected, I cannot receive

beforehand.

documents by pressing

L Press {*}{*}{*}{9} firmly.

{*}{*}{*}{9}.

L The memory is full of received documents due to a lack of recording paper

 

or a recording paper jam. Install paper (page 4) or clear the jammed paper

 

(page 36).

 

 

 

 

9.3.5 Copying

 

 

 

Problem

Cause & Solution

The unit will not make a copy.

L You cannot make a copy during programming.

 

L You cannot make a copy during a telephone conversation.

 

 

A black line, a white line or

L The scanner glass, white plate or rollers are dirty with correction fluid, etc.

smudge appears on the

Clean them (page 37). Please do not insert a document before correction

copied document.

fluid has dried completely.

 

 

The copied document is

L The recording paper is not installed correctly. Make sure that the shiny side

blank.

of the paper is facing down and re-install the paper (page 4).

 

 

The copied image is

L Adjust the width of the document guides to fit the actual size of the

distorted.

document.

 

 

The printing quality is poor.

L The thermal head is dirty. Clean it (page 37).

 

L Adjust the print contrast using feature #59 (page 28).

 

 

 

 

9.3.6 If a power failure occurs

LThe unit will not function.

LThe unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements

should be made for access to emergency services.

LFax transmission and reception will be interrupted.

LIf delayed transmission (feature #25 on page 27) is programmed and power failure prevents the document from

being sent at the set time, the transmission may be cancelled.

LIf any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will be printed stating which documents in memory have been erased.

LThe date and time setting may be lost. If the correct date and time is not displayed after the power has been restored, set the date and time again (page 10).

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Personal Facsimile Model No.KX-FT932HK Model No.KX-FT934HKImportant Information Connections Included accessoriesAccessory information Available accessoriesFAX/START Recording paperFax sending / Copying To make a copy Press Copy Fax receivingCopy FAX/START To send a faxEnvironment Important safety instructionsInstallation For best performanceRoutine care C D E F Location of ControlsDisplay Incoming Call Adjusting volumeOverview SET Dialling modeDate and time Your logoFlash Stopset NO.= Your fax numberLOGO=Bil Your FAX no Press SETPhonebook One-touch dial featureFor stations Caller ID serviceJul.20 1120AM 1345678901 Jul.20 1120AM How Caller ID is displayedCaller ID FAX/START Stop Monitor Example 10 NEW Calls 1059AMCaller ID Erasing caller informationCaller ID FAX/START MonitorInto the one-touch dial Into the phonebookStop FAX/START Monitor Using the FINE, Super Fine and PhotoSending a fax manually Documents you can sendStop FAX/START Lower Erasing a stored item from the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryReceiving a fax manually Auto answer OFF Selecting the way to use your fax machineStop FAX/START Activating TEL/FAX modeConnecting TEL/FAX ModeReceiving a fax automatically Auto answer on Activating FAX only modeFAX only Mode Using with the Distinctive Ring feature To stop copying Making a copyStop Copy Programming Basic featuresProgramming basic features Programming advanced featuresAdvanced features FAX Activation Connecting ToneSET Default RESET=NO ± LCD Contrast =NORMAL ±Program code and direct command button #80 Set default #78 TEL/FAX ring settingCheck Document Error messages ReportsError messages Display Call ServiceCover Open Modem ErrorPolling Error Transmit ErrorGeneral When a function does not work, check hereInitial settings Fax receiving CONNECTING....., butFax sending Copying If a power failure occursFor KX-FT932 Skip to step For KX-FT934 Recording paper jamsDocument jams sending Do not use paper products, such as paper towels or tissues Document feeder / scanner glass cleaningReference lists and reports Specifications Attach your sales receipt here User recordFor your future reference Index Page Page Global web site
Top Page Image Contents