Panasonic KX-FT932HK, KX-FT934HK manual Basic features, Programming basic features

Page 26

8. Programmable Features

8.1 Programming

{A}{B}{<}{>} {SET} {MENU}

8.1.1 Programming basic features

1Press {MENU}.

2Select the feature you wish to program.

Press {<} or {>} repeatedly to display the desired feature.

L The current setting of the feature will be displayed.

3Press {A} or {B} repeatedly to display the desired setting.

L This step may be slightly different depending on the feature.

4Press {SET}.

LThe setting you selected is set, and the next feature will be displayed.

5To exit programming, press {MENU}.

8.1.2 Programming advanced features

1Press {MENU}.

2Press {<} or {>} repeatedly to display “ADVANCE SETTINGS”.

3Press {SET}.

4Select the feature you wish to program.

Press {<} or {>} repeatedly to display the desired feature.

L The current setting of the feature will be displayed.

5Press {A} or {B} repeatedly to display the desired setting.

L This step may be slightly different depending on the feature.

6Press {SET}.

LThe setting you selected is set, and the next feature will be displayed.

7To exit programming, press {MENU} at any time.

To program by entering the program code number directly

You can select a feature by directly entering its program code (# and a 2-digit number) instead of using {<} or {>}.

1.Press {MENU}.

2.Press {#} and the 2-digit code (page 26 to page 28).

3.Press {A} or {B} repeatedly to display the desired setting.

L This step may be slightly different depending on the feature.

4.Press {SET}.

5.To exit programming, press {MENU}.

To cancel programming

Press {MENU} to exit.

8.2 Basic features

Code #01: Setting the date and time

SET DATE & TIME

PRESS SET

See page 10 for details.

Code #02: Setting your logo

YOUR LOGO

PRESS SET

See page 10 for details.

Code #03: Setting your fax number

YOUR FAX NO.

PRESS SET

See page 12 for details.

Code #04: Printing a sending report

SENDING REPORT

=ERROR [±]

To print a sending report for fax transmission results (page 18).

“ERROR” (default): A sending report will be printed only when fax transmission fails.

“ON”: A sending report will be printed after every transmission.

“OFF”: The sending reports will not be printed.

Code #06: Changing the ring setting in FAX ONLY mode

FAX RING COUNT

RINGS=2 [±]

To change the number of rings before the unit answers a call in FAX ONLY mode.

You can select “1”, “2” (default), “3”, “4” or “5 EXT.TAM”.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model No.KX-FT932HK Model No.KX-FT934HK Personal FacsimileImportant Information Available accessories Included accessoriesAccessory information ConnectionsFAX/START Recording paperFax sending / Copying To send a fax Fax receivingCopy FAX/START To make a copy Press CopyFor best performance Important safety instructionsInstallation EnvironmentRoutine care Location of Controls C D E FDisplay Incoming Call Adjusting volumeOverview Your logo Dialling modeDate and time SETFlash Stopset Your FAX no Press SET Your fax numberLOGO=Bil NO.=One-touch dial feature PhonebookCaller ID service For stationsExample 10 NEW Calls 1059AM How Caller ID is displayedCaller ID FAX/START Stop Monitor Jul.20 1120AM 1345678901 Jul.20 1120AMMonitor Erasing caller informationCaller ID FAX/START Caller IDInto the phonebook Into the one-touch dialDocuments you can send Using the FINE, Super Fine and PhotoSending a fax manually Stop FAX/START MonitorStop FAX/START Lower Adding a new item into the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Erasing a stored item from the broadcast memorySelecting the way to use your fax machine Receiving a fax manually Auto answer OFFTEL/FAX Mode Activating TEL/FAX modeConnecting Stop FAX/STARTReceiving a fax automatically Auto answer on Activating FAX only modeFAX only Mode Using with the Distinctive Ring feature To stop copying Making a copyStop Copy Programming advanced features Basic featuresProgramming basic features ProgrammingAdvanced features LCD Contrast =NORMAL ± Connecting ToneSET Default RESET=NO ± FAX ActivationProgram code and direct command button #78 TEL/FAX ring setting #80 Set defaultCall Service Error messages ReportsError messages Display Check DocumentTransmit Error Modem ErrorPolling Error Cover OpenGeneral When a function does not work, check hereInitial settings Fax receiving CONNECTING....., butFax sending If a power failure occurs CopyingFor KX-FT932 Skip to step For KX-FT934 Recording paper jamsDocument jams sending Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissuesReference lists and reports Specifications Attach your sales receipt here User recordFor your future reference Index Page Page Global web site
Top Page Image Contents