Panasonic KX-FT901BX manual To monitor the room, To record a marker message

Page 44

8. Answering Device (KX-FT907 only)

To monitor the room

Press {6} to activate the unit’s microphone and listen to the room where the unit is located for about 30 seconds.

LAfter 30 seconds, a beep will sound. To continue monitoring, press {6} again within 10 seconds.

To record a marker message

After playing back messages, you can leave an additional message.

1.Wait for 3 beeps indicating the end of the remote operation.

2.Wait for 1 beep.

3.Wait about 10 seconds.

LThe voice guide and/or 1 beep will be heard.

4.Leave a message.

To re-record your greeting message

You can record a new TAD/FAX greeting message.

1.Press {7} to start recording. L A long beep will sound.

2.Speak clearly for up to 16 seconds.

LIf you pause for over 2 seconds, 6 beeps will sound and recording will stop. Repeat from step 1 within 10 seconds.

3.To stop recording, press {9}.

LThe new greeting message will be played.

To skip the greeting message

Press {0} during the greeting message playback.

LThe unit will skip the rest of the greeting message.

To turn message transfer ON or OFF

You must program a transfer telephone number beforehand (feature #60, page 50).

Press {8}{1} to turn ON the message transfer. Press {8}{2} to turn OFF the message transfer.

LIf a transfer telephone number is not programmed, you cannot turn this feature ON. 6 beeps will sound.

To turn pager call ON or OFF

You must program a pager number beforehand (feature #70, page 37).

Press {8}{3} to turn ON the pager call. Press {8}{4} to turn OFF the pager call.

LIf a pager number is not programmed, you cannot turn this feature ON. 6 beeps will sound.

To change from TAD/FAX to TEL mode

Press {8}{0} to change the receiving mode from TAD/FAX to TEL.

LYou cannot return to TAD/FAX mode in the same call. To return to TAD/FAX mode, see the following.

To change from TEL to TAD/FAX mode

1.Call your unit and wait for 10 rings.

LThe answering device will temporarily answer the call.

2.Enter the remote operation ID (feature #11, page 47) during the greeting message.

LA long beep will sound, and your unit will switch to TAD/FAX mode.

3.Hang up the handset.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Operating Instructions Installation and Quick Start On another fax machineIndex Included accessories Accessory informationQuantity Model NoConnections Recording paper Correct IncorrectFor KX-FT901 For KX-FT903/KX-FT907Fax sending / Copying Fax receivingTo send a fax FAX/START CopyAnswering device KX- FT907 only Recording your own greeting messageListening to recorded messages Record MIC Stop FAX/STARTHelp function Help SETImportant safety instructions InstallationFor best performance EnvironmentConnection Speakerphone operation KX-FT907 onlyKX-FT907 Location of controlsKX-FT901 KX-FT903 Overview Adjusting volume Date and timeYour logo To correct a mistakeMute Menu SET To enter characters with the dial keypad Keys CharactersTo select characters using a or B Keys CharactersTo enter your logo Example Bill To delete a characterExample +234 Your fax numberTo delete a number Storing one-touch dial Storing navigator directory itemsItems Menu LowerTo keep the telephone number secret Editing a stored itemErasing a stored item Using the one-touch dial feature Using the navigator directoryStop Help To confirm the stored telephone number on the displayCaller ID service Recording a telephone conversation KX-FT907 onlyHow Caller ID is displayed Record StopViewing and calling back using caller information Search StopErasing specific caller information Editing a caller’s telephone number before calling backErasing all caller information For navigator directory This feature is not available in the following casesMenu SET Setting the dial lock feature Menu SETTo correct an emergency telephone number To make an emergency callInitiating voice contact Receiving a request for voice contactDocuments you can send Document weight Using stationsUsing navigator directory Maximum document sizeBroadcast transmission KX- FT903/KX-FT907 only Programming items into the broadcast memoryIf your unit does not send a fax Broadcast Station keys StopBroadcast SET Stop To cancel broadcast transmissionSending the same document to pre-programmed parties To cancel transmit polling Menu SET StopUse only as a fax FAX only mode Selecting the way to use your fax machineUse as a telephone and/or fax TEL/FAX mode Use mostly as a telephone TEL modeStop FAX/START Activating TEL modeReceiving a fax manually Auto answer Activating TAD/FAX mode KX-FT907 only Ring setting in TAD/FAX modeReceiving a fax automatically Auto answer on Receiving a voice message and fax document in one callSilent fax recognition ring setting feature #30, Activating FAX only modeActivating TEL/FAX mode Pager call Example 202 555 1234PP12345678Ring pattern Distinctive Ring service from your phone companyUsing with the ring detection feature To select the resolution To stop copyingRecord Erase Auto Answer MIC Stop FAX/START SET Recording your greeting messagesErasing your recorded greeting message Play Messages Erase Slow Leaving a message for others or yourselfListening to recorded messages Erasing recorded messages Other remote operations Remote operations using remote commandsOperating from a remote location To change from TAD/FAX to TEL mode To change from TEL to TAD/FAX modeTo monitor the room To record a marker messageHow this feature works Transferring recorded messages to another telephoneRecording your transfer greeting message To check the transfer greeting messageProgramming basic features Programming advanced featuresTo cancel programming ProgrammingBasic features Advanced features Code #42 KX-FT907 only Setting the message alert Code #43 KX-FT907 only Setting the recording time alertCode #46 Setting friendly reception Code #47 KX-FT907 only Setting the voice guidanceCode #60 KX-FT907 only Setting the message transfer Code #67 KX-FT907 only Setting the incoming message monitorCode #76 Setting the connecting tone Code #70 Calling your pager KX-FT901/KX-FT903Error messages Reports Error messages DisplayUnnecessary messages When a function does not work, check here Initial settingsGeneral Fax sendingFax receiving CopyingAnswering device KX- FT907 only If a power failure occursRecording paper jams Document jams sending Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissuesThermal head / head cover cleaning Reference lists and reports Specifications Attach your sales receipt here User recordFor your future reference Index TAD/FAX TEL/FAXIndex Manufacturer Global web site Copyright PFQX2051ZA CM0604DM0

KX-FT901BX specifications

The Panasonic KX-FT901BX is a versatile and reliable fax machine designed to meet the demands of both home and small office environments. This model excels in delivering quality performance, ease of use, and a variety of features that cater to the needs of its users.

One of the standout characteristics of the KX-FT901BX is its high-efficiency thermal printing technology. This allows for clear, crisp prints that are resistant to fading over time. The machine produces documents at a resolution of up to 200 x 200 dpi, ensuring that text and images are sharp and legible. Additionally, the fax machine can handle standard paper sizes, making it easy to print full-size documents.

The KX-FT901BX comes equipped with a reliable automatic document feeder (ADF), capable of holding up to 10 pages at a time. This feature significantly streamlines the faxing process, allowing users to send multiple pages without the need for manual intervention. The flexibility of sending and receiving faxes is enhanced by the machine’s ability to handle both color and black-and-white documents.

Another notable feature is the built-in telephone functionality. The KX-FT901BX operates as a standard phone, enabling users to make and receive voice calls. This dual functionality makes the machine a convenient addition to any workspace, allowing users to save on device clutter.

The fax machine boasts a memory capacity of up to 28 pages, which ensures that important faxes are retained even if the machine runs out of paper. In addition, it includes a caller ID function that displays incoming calls, providing users with the necessary information before they answer.

Panasonic has incorporated user-friendly navigation and a straightforward control panel into the KX-FT901BX. This design simplifies the process of sending, receiving, and managing documents, making it accessible for users of all tech-savviness levels.

In conclusion, the Panasonic KX-FT901BX stands out in its class with its combination of thermal printing technology, automatic document feeder, dual phone functionality, and user-friendly features. It remains a reliable choice for those seeking an effective, multifunctional fax machine suitable for any professional setting.
Top Page Image Contents