Maintenance
2 Flip up the green levers on each side of the white roller.
3 Wipe the scanning glass (under the
white roller) and rollers with a cotton swab.
•Make sure that all dirt and stains (such as correcting fluid) are removed. Dirt
and stains will cause vertical lines on transmitted images and copies.
If the scanning glass is difficult to clean
If you find it difficult to remove dirt from the scanning glass, you can try moistening the swab with isopropyl alcohol or denatured alcohol. Take care that no alcohol gets on the rollers.
4 Flip down the green levers on each side of the white roller. Rotate the
front gear until the film is taut, and then close the operation panel (press down on both sides to make sure it clicks into place).
8. Maintenance
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
Do not use benzene or thinner. These solvents may damage or discolor the machine.
71