Sharp FO-P610/FO-P630 operation manual Messages and Signals, Press Start KEY

Page 79

Messages and Signals

Messages and Signals

Display messages

Note: If you have turned on the Caller ID function, see page 59 for display messages related to Caller ID.

ADD PAPER & /	Check the printing paper. If the tray is empty, add
PRESS START KEY	paper and then press the START/MEMORY key. If
(alternating messages)	there is paper in the tray, make sure it is inserted
	correctly (take out the stack, align the edges evenly,
	and then reinsert it in the tray) and then press the
	START/MEMORY key.

CHECK FILM/	These alternating messages appear when there is a
CHECK COVER/	problem in the print compartment that prevents
CHECK PAPER JAM	printing. Check to see if the imaging film is not loaded
(alternating messages)	properly or if it has been used up and needs
	replacement. Make sure the operation panel is
	completely closed (press down on both sides). If a
	paper jam has occurred, clear the jam as explained in
	the following section, Clearing Paper Jams.

CHECK PAPER SIZE	An incorrect size of paper has been loaded in the
	paper tray. Remove the paper and load A4-size
	paper.

DOCUMENT JAMMED	The original document is jammed. See the following
	section, Clearing Paper Jams. Document jams will
	occur if you load more than 10 pages at once or load
	documents that are too thick (see page 26).

FAX RX IN MEMORY	A fax has been received in memory because the
	imaging film needs replacement, you have run out of
	printing paper, or the paper is jammed. The fax will
	print out automatically when the problem is fixed.

FUNCTION MODE	The FUNCTION key has been pressed.

INCORRECT FILM/	The wrong type of imaging film is loaded in the
CHECK FILM	machine. Printing is not possible. The machine can
	only print when SHARP FO-9CR imaging film is
	loaded.

9. Trouble- shooting

77

Image 79

Contents FO-P610/FO-P630 Warranty Introduction Applicable telephone line Dimensions withoutImportant safety information Important Notice for NEW Zealand Users Table of Contents Printing Lists Maintenance Troubleshooting Look at the Operation Panel Stop key UP and Down arrow keysNumber keys Panel releaseMonitoring phone conversations When speaking through the handset, you can pressAbout condensation InstallationUnpacking Checklist Points to keep in mind when setting upConnecting the power cord Connecting the handsetConnections Connecting the telephone line cord Attach the paper tray and paper tray extension Moving your fax and reconnectingComments Remove the seal covering the TEL. SET socket Extension phone optionalConnect the extension phone line to the TEL. SET socket Near end of film detection Loading the Imaging FilmCompartment Remove the new roll of imaging film from its packagingInsert the green gears Insert the film into the printThan this line Loading Printing PaperPress Stop to return to the date and time display Print contrast settingPress Once Twice Select the print contrastPress Function once Twice Entering Your Name and Fax NumberEnter your fax number by pressing the number keys max digits Press once and once Setting the Date and TimeEnter a two-digit number for the day 01 to Example the 5th Press START/MEMORY to start the clock Enter the year four digits Example 2003Mode Setting the Reception ModeSetting the reception mode TEL/FAX modeSpeaker Volume AdjustmentIf you selected Ringer OFF OK ? RingerLoading one page at a time Loading up to 10 pages at once Size and weightSending Faxes Transmittable DocumentsOther restrictions Loading the DocumentResolution settings Adjusting the Resolution and ContrastLoad the documents Contrast settingsDesired resolution and contrast Settings appear in the displaySending a Fax by Normal Dialling Storing fax and phone numbers for automatic dialling Sending a Fax by Automatic DiallingDigits can be entered. Note a space cannot be entered Date and time display Make the desired changes to the name Editing and clearing auto-dial numbersPress Function once Select Edit or ClearIf you are sending a fax, load the documents Using an auto-dial numberReturn to to edit or clear another number, or press Stop to Return to the date and time displaySending a fax by Direct Keypad Dialling Redial Automatic redialling Press To select YES, or Error Correction ModeSelect no Press Stop to return to the date Time display Broadcasting sending a fax to multiple destinations Sending a Fax From MemoryIf the memory becomes full Memory transmissionPseudo Ring Duration for Tel/Fax Mode Using TEL/FAX ModeReceiving Faxes Enter a number as follows for the desired duration Using A.M. ModeTo select A.M. mode, press Changing the number of rings Using FAX ModePress Function once and once Enter the desired number of rings any Using TEL ModeNumber from 2 to Replace the handset Answer the extension phone when it ringsAnswering with the fax’s handset Answering on an extension phonePutting a call on hold Fax Signal Receive Optional Reception SettingsChanging the number for remote fax activation Enter the desired number any number from 0 to Example 3 Reception RatioPress 1 to select AUTO, or 2 to select 100% Substitute Reception to Memory Load the documents face down. Maximum of 10 pages Making CopiesPress To set copy cut-off to YES Copy Cut-offRemaining part of the document Answering Machine Connection Connecting an Answering MachineSet your answering machine to auto answer Using the Answering Machine ConnectionSet the reception mode to A.M Changing the outgoing messageHow answering machine mode operates Optional A.M. Mode SettingsQuiet Detect Time To turn off the function Enter a number from 01 to 10, or enterOr enter 00 to turn off the function For the number of seconds of the delayQuiet Detect Start Time Enter a 2-digit number from 01 toOn A.M. Failure Special Functions Caller ID Requires Subscription to ServiceDisplay messages How Caller ID operatesViewing the Caller ID list Fax Press twicePriority Call To delete calls from the Caller ID listNumber Press Stop to return to the date and time display Blocking voice calls FO-P610, or 7 times on the FO Distinctive Ring Requires Subscription to ServiceP630 Press Once Blocking Reception of Unwanted Faxes Blocking Reception of Unwanted FaxesPress Poll Polling Requesting a Fax TransmissionPress or until the desired list appears in the display Once Setup ListPrinting Lists Telephone Number ListTransaction Report Caller-ID ListHeadings in Transaction Report Help List Transaction Report print conditionPrint head MaintenanceScanning glass and rollers If the scanning glass is difficult to clean HousingProblem Solution TroubleshootingProblems and Solutions Line errorCorrect socket. See Connecting the handset on Dialling and transmission problemsReception and copying problems Answering machine connection See Loading the Imaging Film on General problemsPress Start KEY Messages and SignalsSubstitute Reception to Memory on page 49. If you Recalling Audible signalsClearing a jammed document Clearing Paper JamsClearing jammed printing paper Sending Faxes Quick Reference GuideIndex Index Sharp Corporation of NEW Zealand Limited