Sharp FO-P610/FO-P630 Using the Answering Machine Connection, Changing the outgoing message

Page 55

Using the Answering Machine Connection

Important: In New Zealand, not all standard telephones and answering machines will respond to incoming ringing when connected to the extension socket of the equipment.

Changing the outgoing message

The outgoing message (OGM) of your answering machine should be changed to inform callers who want to send a fax to press their Start key. For example, your message might go as follows:

"Hello. You've reached the ABC company. No one is available to take your call right now. Please leave a message after the beep or press your facsimile Start key to send a fax. Thank you for calling."

♦It is advisable to keep the length of the message under 10 seconds. If it is too long, you may have difficulty receiving faxes sent by automatic dialling.

♦If your outgoing message must be longer than 10 seconds, leave a pause of about four seconds at the beginning of the message. This will give your fax a chance to detect fax tones sent when automatic dialling is used.

Using the Answering Machine Connection

1 Set the reception mode to A.M.

TEL FAX

RECEPTION

MODE

TEL/FAX A.M.

2 Set your answering machine to auto answer.

♦Your answering machine must be set to answer on a maximum of two rings. If not, you may not be able to receive faxes sent by automatic dialling.

Note: If your answering machine has a remote retrieval function, make sure the code used to activate remote retrieval is different from the code used to activate fax reception with an extension telephone (see Chapter 3, Receiving Faxes). If they are the same, entering the code from an outside telephone to retrieve messages will cause the fax machine to be activated.

Answering	Machine
5.

53

Image 55

Contents FO-P610/FO-P630 Warranty Introduction Applicable telephone line Dimensions withoutImportant safety information Important Notice for NEW Zealand Users Table of Contents Printing Lists Maintenance Troubleshooting Look at the Operation Panel Stop key UP and Down arrow keysNumber keys Panel releaseMonitoring phone conversations When speaking through the handset, you can pressAbout condensation InstallationUnpacking Checklist Points to keep in mind when setting upConnecting the power cord Connecting the handsetConnections Connecting the telephone line cord Attach the paper tray and paper tray extension Moving your fax and reconnectingComments Remove the seal covering the TEL. SET socket Extension phone optionalConnect the extension phone line to the TEL. SET socket Near end of film detection Loading the Imaging FilmCompartment Remove the new roll of imaging film from its packagingInsert the green gears Insert the film into the printThan this line Loading Printing PaperPress Stop to return to the date and time display Print contrast settingPress Once Twice Select the print contrastPress Function once Twice Entering Your Name and Fax NumberEnter your fax number by pressing the number keys max digits Press once and once Setting the Date and TimeEnter a two-digit number for the day 01 to Example the 5th Press START/MEMORY to start the clock Enter the year four digits Example 2003Mode Setting the Reception ModeSetting the reception mode TEL/FAX modeSpeaker Volume AdjustmentIf you selected Ringer OFF OK ? RingerLoading one page at a time Loading up to 10 pages at once Size and weightSending Faxes Transmittable DocumentsOther restrictions Loading the DocumentResolution settings Adjusting the Resolution and ContrastLoad the documents Contrast settingsDesired resolution and contrast Settings appear in the displaySending a Fax by Normal Dialling Storing fax and phone numbers for automatic dialling Sending a Fax by Automatic DiallingDigits can be entered. Note a space cannot be entered Date and time display Make the desired changes to the name Editing and clearing auto-dial numbersPress Function once Select Edit or ClearIf you are sending a fax, load the documents Using an auto-dial numberReturn to to edit or clear another number, or press Stop to Return to the date and time displaySending a fax by Direct Keypad Dialling Redial Automatic redialling Press To select YES, or Error Correction ModeSelect no Press Stop to return to the date Time display Broadcasting sending a fax to multiple destinations Sending a Fax From MemoryIf the memory becomes full Memory transmissionPseudo Ring Duration for Tel/Fax Mode Using TEL/FAX ModeReceiving Faxes Enter a number as follows for the desired duration Using A.M. ModeTo select A.M. mode, press Changing the number of rings Using FAX ModePress Function once and once Enter the desired number of rings any Using TEL ModeNumber from 2 to Replace the handset Answer the extension phone when it ringsAnswering with the fax’s handset Answering on an extension phonePutting a call on hold Fax Signal Receive Optional Reception SettingsChanging the number for remote fax activation Enter the desired number any number from 0 to Example 3 Reception RatioPress 1 to select AUTO, or 2 to select 100% Substitute Reception to Memory Load the documents face down. Maximum of 10 pages Making CopiesPress To set copy cut-off to YES Copy Cut-offRemaining part of the document Answering Machine Connection Connecting an Answering MachineSet your answering machine to auto answer Using the Answering Machine ConnectionSet the reception mode to A.M Changing the outgoing messageHow answering machine mode operates Optional A.M. Mode SettingsQuiet Detect Time To turn off the function Enter a number from 01 to 10, or enterOr enter 00 to turn off the function For the number of seconds of the delayQuiet Detect Start Time Enter a 2-digit number from 01 toOn A.M. Failure Special Functions Caller ID Requires Subscription to ServiceDisplay messages How Caller ID operatesViewing the Caller ID list Fax Press twicePriority Call To delete calls from the Caller ID listNumber Press Stop to return to the date and time display Blocking voice calls FO-P610, or 7 times on the FO Distinctive Ring Requires Subscription to ServiceP630 Press Once Blocking Reception of Unwanted Faxes Blocking Reception of Unwanted FaxesPress Poll Polling Requesting a Fax TransmissionPress or until the desired list appears in the display Once Setup ListPrinting Lists Telephone Number ListTransaction Report Caller-ID ListHeadings in Transaction Report Help List Transaction Report print conditionPrint head MaintenanceScanning glass and rollers If the scanning glass is difficult to clean HousingProblem Solution TroubleshootingProblems and Solutions Line errorCorrect socket. See Connecting the handset on Dialling and transmission problemsReception and copying problems Answering machine connection See Loading the Imaging Film on General problemsPress Start KEY Messages and SignalsSubstitute Reception to Memory on page 49. If you Recalling Audible signalsClearing a jammed document Clearing Paper JamsClearing jammed printing paper Sending Faxes Quick Reference GuideIndex Index Sharp Corporation of NEW Zealand Limited