Connections
Telephone line cord
Insert one end of the telephone line cord into the adapter. Insert the other end of the line cord into the socket on the back of the fax marked TEL. LINE. Plug the adapter into the telephone socket on the wall.
1. Installation
For Australia
For New Zealand
Be sure to insert the telephone line cord into the TEL. LINE socket. Do not insert it into the TEL. SET socket.
TEL. | TEL. |
SET | |
| LINE |
Comments:
∙Your fax is set for tone dialling. If you are on a pulse only dial line, you must set the fax for pulse dialling by changing Option Setting 7. This procedure is described in Chapter 8, "Option Settings".
∙If you intend to use a computer fax modem on the same phone line, you must reset Option Setting 14 (Fax Signal Receive) to NO in order to prevent transmission and reception errors. This procedure is described in Chapter 8, "Option Settings".
7