Sharp FO-B1600 Press to return to the date and time display, Set the reception mode to FAX

Distinctive Ring (Requires Subscription to Service)

4 Press a number from 1 to 3 to select the ring pattern below that matches your second number’s ring pattern. Press 4 to have your fax automatically answer your normal telephone number. Press 5 to turn off the distinctive ring function.

1	RING PATTERN 1	Two short rings
2	RING PATTERN 2	One short, one long, and one short ring
3	RING PATTERN 3	Two short rings and one long ring
4	STANDARD RING	Your standard (normal) ring pattern
5	OFF SETTING	Turn distinctive ring off

The display briefly shows your selection, then:

FAX SIGNAL RX

5

6

Press to return to the date and time display.

STOP

Set the reception mode to FAX.

TEL FAX

RESOLUTION/

RECEPTION MODE

A.M.

♦When using distinctive ring, you must set the reception mode of your fax machine to FAX. When your designated fax number is dialed, your fax will automatically answer and begin reception after two rings. Note that other devices on the same line will also ring until your fax answers. If one of your other numbers is dialed, the fax will ring; however, it will not answer.

78