Brother FAX-575 manual Remote commands, Off

Remote commands

Follow the commands below to access features when you are away from the fax machine. When you call the fax machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command.

Remote commands		Operation details
95	Change the Fax
	Forwarding or Paging
	settings
	1 OFF	You can select OFF after you have
		registered or erase all the fax messages.
	2 Fax Forwarding	If you hear one long beep, the change has
		been accepted. If you hear three short
	3 Paging
		beeps, you cannot change it because
	4 Fax Forwarding number	something has not been set up (for
		example, perhaps a fax forwarding or
		paging number had not been registered).
		You can register your Fax Forwarding
		number by entering 4 (see page 8-6).
		Once you have registered the number,
		Fax Forwarding will work.
	6 Fax Storage	You can turn FAX Storage to ON (or OFF
		after you have retrieved or erased all your
		messages.)
96	Retrieve a fax
	1 Print a memory status list	Enter the number of a remote fax machine
		to print a memory status list.
	2 Retrieve all faxes	Enter the number of a remote fax machine
		to receive stored fax messages.
		(See page 8-6.)
	3 Erase faxes from the	If you hear one long beep, you can erase
	memory	fax messages from the memory.
97	Check the Receiving
	Status
	1 Fax	You can check whether the fax machine
		has received any faxes. If yes, you will
		hear one long beep. If no, you will hear
		three short beeps.
98	Change the Receive
	Mode
	1 TAD:ANSWER MACH.	If you hear one long beep, your change
		has been accepted.
	2 FAX/TEL
	3 FAX ONLY
90	Exit	Press 9 0 to exit Remote Retrieval. Wait
		for the long beep, then replace the
		handset.

Remote Fax Options 8 - 5