Canon FAX-L400 Dialling Through a Switchboard, Use 4 -or e + to select 6.R-KEY Setting → press OK

Dialling Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other telephone switching system, you have to dial the outside line access number first, and then the number of the party you are calling.

To facilitate this procedure, you can register the PBX access type and the outside line access number under the R key so that you only need to press this key before dialling the fax/telephone number you want to reach. See below for details.

The available settings and the factory default settings vary depending on the current country selection. You can print the USER’S DATA LIST to check the current setting. (→ p. 2-7)

1Press Additional Functions.

2Use 4 (–)or e (+) to select 4.FAX SETTINGS → press OK twice.

ADDITIONAL FUNCTIONS	→	USER SETTINGS
4.FAX SETTINGS		1.TEL LINE SETTINGS

3Use 4 (–)or e (+) to select 6.R-KEY SETTING → press OK.

USER SETTINGS	→	R-KEY SETTING
6.R-KEY SETTING		PSTN

4Use 4 (–)or e (+) to select PBX → press OK.

R-KEY SETTING	→		PBX
PBX			HOOKING
		Ex:

5Use 4 (–)or e (+) to select the access type of your switching system.

	PBX
Ex:	HOOKING

2

Registering Information

2-9