Canon FAX-L400 manual TX Transmission Report, Slerexe Company Limited

Page 78

TX (Transmission) REPORT

The machine is factory-set to print a TX (transmission) REPORT only when an error occurs during sending. To change this setting → p. 10-5.

If you set the machine to print a report, a TX REPORT or an ERROR TX REPORT, similar to the ones below, will be printed depending on the setting you select.

03/12 2002 17:47 FAX 123 4567

CANON

001

	***********************
	*** TX REPORT		***
	***********************
	TRANSMISSION OK
	TX/RX NO	0003
	DESTINATION TEL #	1 432 2060
	CONNECTION ID	Canon OPTICS
	ST. TIME	12/27 14:59
	03/12USAGE2002 T17:21 FAX 123 4567	00 00	CANON		001
	PGS. SENT	0
	RESULT	NG	#018
		BUSY/NO SIGNAL
		*******************************
		***	ERROR TX REPORT	***
		*******************************

TX FUNCTION WAS NOT COMPLETED
TX/RX NO	0004
DESTINATION TEL #	20 545 8545
DESTINATION ID	Canon EUROPE
ST. TIME	03/12 17:21
TIME USE	00 18
PAGES SENT	1
RESULT	NG	#0018 BUSY/NO SIGNAL

THE SLEREXE COMPANY LIMITED

SAPORS LANE¥BOOLE¥DORSET¥BH25 8ER

	TELEPHONE BOOLE (945 13) 51617 — FAX 1234567
Our Ref. 350/PJC/EAC	December 3, 2002
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.

OK: Transmission successful

NG: Some or no pages sent

	Number or pages sent	If you enable the REPORT WITH TX IMAGE setting. (→ p. 10-5)
	Transmission duration	The first page of the document will print on the report to remind
	Transmission duration	you of the contents of the document.
		you of the contents of the document.
	Transmission time

8

Reports and Lists

8-3

Image 78

Contents FacsimileFacsimile GuideGuide Trademarks Using Your DocumentationCopyright Set-up Guide Quick Reference Guide User’s GuideModel Name H12257 FAX-L400Contents Receiving Faxes Appendix Specifications Type Conventions Used in This Guide → User’s GuideOperation Panel IntroductionCustomer Support One-touch Panel Closed Hook KeyAlarm indicator Fax Resolution KeyUse/Memory indicator Stop/Reset KeyOne-touch Panel Opened Receive Mode KeyDelayed Transmission Key Memory Reference KeyStandby Display Guidelines for Entering Letters, Symbols, and Numbers Registering InformationMethods of Registering Information in the Machine Continue entering other letters using the numeric keys Entering SymbolsEntering Letters Press T to switch to number mode Press the numeric key Continue entering other numbers using the numeric keysCorrecting a Mistake What is Sender Information? Registering Sender InformationEntering the Date and Time Use 4 -or e + to select 7.TIMER SettingsPress Stop/Reset to return to standby display Press Additional FunctionsUse 4 -or e + to select 4.FAX Settings → press OK four times Registering Your Fax/Telephone Number and NameUse 4 -or e + to select 8.PRINT Lists → press OK twice Setting the Telephone Line Type Use 4 -or e + to select 2.TEL Line Type → press OKUse 4 -or e + to select 6.R-KEY Setting → press OK Dialling Through a SwitchboardUse 4 -or e + to select 4.FAX Settings → press OK twice Use 4 -or e + to select PBX → press OKIf you selected Prefix in step If you selected Hooking in stepPress OK Press Redial/Pause to enter a pause → press OKWhat is Speed Dialling? Speed DiallingSpeed Dialling Methods One-touch Speed Dialling Registering Numbers for One-touch Speed DiallingChanging/Deleting a One-touch Speed Dialling Entry To change a one-touch speed dialling entryUse 4 -or e + to select 5.ADD. Registration → press OK Coded Speed DiallingRegistering Numbers for Coded Speed Dialling Use 4 -or e + to select 2.CODED SPD Dial → press OKPress OK Press Stop/Reset to return to standby display Changing/Deleting a Coded Speed Dialling EntryTo change a coded speed dialling entry Use 4 -or e + to select 3.GROUP Dial → press OK Group DiallingCreating Groups To register a group under a one-touch speed dialling keyTo enter a destination registered for coded speed dialling Use 4 -or e + to select 8.PRINT Lists → press OK Speed Dialling ListsPrinting Speed Dialling Lists Use 4 -or e + to select 2.SPEED Dial List → press OKOne-touch List Coded Dial ListPress 4 -for YES Cancelling the Printout ListUse 4 -or e + to select 3.CANCEL Report → press OK Group Dial ListPage Sending Faxes Adjusting the Quality of Your FaxesSetting the Scanning Resolution Preparing to Send a FaxPress FAX → Fax Resolution to select the resolution When the Fax Number is Registered in the Machine Setting the Scanning DensityWhen the Fax Number is Not Registered in the Machine Dialling MethodsRegular Dialling One-touch Speed Dialling Coded Speed Dialling Group DiallingDirectory Dialling Press DirectoryPress 4 -or e + to display the other names Sending Methods Press FAX to set to Fax modeUsing the ADF Memory SendingPress Function → Book Sending Using the Platen GlassPress Start to begin scanning for sending Press 4 -or e + to select the document sizePress Start to begin scanning Press Stop/Reset → OK Cancelling SendingCancelling Memory Sending Press Stop/ResetCancelling Automatic Redialling Redialling When the Line is BusyCancelling Manual Redialling Manual RediallingOne-touch speed dialling Sequential BroadcastingSending a Document to More Than One Destination Coded speed diallingRegular dialling RediallingPress Start Delayed Sending Press Function → Delayed TransmissionConfirming Transmission Status and Sending Reservation Confirming Transmission StatusPress System Monitor Confirming Sending Result and Reservation Press 4 -or e +, to select 2.TX/RX Result → press OKDocuments Stored in Memory Printing a List of Documents in MemoryPress Function Press Memory Reference → OK Use 4 -or e + to select 3.RESEND Document → press OK Resending a Document in MemoryPress Function → Memory Reference Enter the fax numberPrinting a Document in Memory Use 4 -or e + to select 3.PRINT Document → press OKDeleting a Document from Memory Use 4 -or e + to select 4.DELETE Document → press OKPress 4 -to delete the document Page Receiving Faxes Different Ways to Receive a FaxSetting the Receive Mode Press Receive Mode until the mode you want appearsSetting the Options for FaxTel Mode What Happens When FaxTel Mode is SelectedUse 4 -or e + to select 2.FAX/TEL OPT.SET → press OK twice Use 4 -or e + to select 4.FAX Settings → press OKUse 4 -or e + to select 4.RX Settings → press OK Use 4 -or e + to select Receive or Disconnect → press OKReceiving Faxes Manually If you hear a person’s voiceIf you hear a slow beep tone or silence Press 4 -to cancel receiving Receiving Faxes in Memory When a Problem OccursCancelling Receiving Receiving Faxes While Performing Other TasksUsing Polling What Is Polling?Before You Use Polling Receiving Polling Other Fax Machines to Receive a Document Use 4 -or e + to select 2.POLLING RX → press OKDial the other party’s number Setting Up Polling Sending Setting Up a Polling BoxBefore You Can Be Polled to Send Use 4 -or e + to select 2.PASSWORD → press OK Press Stop/Reset to return to the Standby displayUse 4 -or e + to select 3.ERASE After TX → press OK Scanning a Document into the Memory for Polling Sending Place your documents on the machinePress Function → Polling Changing the Polling Box Settings Use 4 -or e + to select 2.CHANGE Data → press OKDeleting a Polling Box Use 4 -or e + to select 3.DELETE File → press OKPage Special Dialling Special FeaturesUse the numeric keys to dial the international access code Dialling an Overseas Number With PausesPause at the end of a number P is fixed to 10 seconds Switching Temporarily to Tone Dialling Press Function → D.T. for dial tone detection Dialling Through a SwitchboardConfirming a Dial Tone Continue with the operation you are performingEnabling Restriction of Your Machine Use 4 -or e + to select 7.SYSTEM Settings → press OKRestricting Use of Your Machine Use 4 -or e + to select 2.LOCK Phone → press OKCancelling Restriction of Your Machine Reports and Lists Summary of Reports and ListsPress Function → Report Use 4 -or e + to select 1.ACTIVITY Report → press OKTX Transmission Report Slerexe Company LimitedRX Reception Report Multi TX/RX Transaction ReportTroubleshooting LCD MessagesFaxing Problems Sending ProblemsYou can not send a fax Can not send using Error Correction Mode ECM Errors occur frequently while sendingFaxes sent from the machine are spotted or dirty Receiving Problems Can not receive a fax automaticallyCan not receive a document manually Print quality is poor Can not receive a fax using Error Correction Mode ECMErrors occur frequently while receiving Faxes do not printYou can not dial Telephone ProblemsIf a Power Cut Occurs Telephone disconnects while you are talkingIf You Can not Solve the Problem Page Understanding the Additional Functions Setting the Additional FunctionsAccessing the Additional Functions Use 4 -or e + to select the submenu you want to changeMenu Descriptions 10-210-3 FAX Settings 10-410-5 10-6 10-7 10-8 Delete FileSelects the country where you are using your machine 10-9ADD. Registration 10-10Print Lists 10-1110-12 Specifications FacsimileTelephone Page Index Document Memory List Memory Clear Report Redial Standard Memo Memo Memo 33126U.S.A