Canon FAX-L400 manual FAX Settings, 10-4

FAX SETTINGS

Name	Descriptions
USER SETTINGS	The basic operation settings in the Fax mode can be
	specified.
1.TEL LINE SETTINGS	Specify the telephone line settings.
1.USER TEL NO.	Your telephone and fax number can be registered within
	20 digits, including spaces.(→ p. 2-6)
2.TEL LINE TYPE	Selects the telephone line type. (→ p. 2-8)
TOUCH TONE	The telephone line is set for touch tone dialling.
ROTARY PULSE	The telephone line is set for rotary pulse dialling.
3.TX START SPEED	Sets the transmission speed for all documents you send.
	33600bps/14400bps/9600bps/7200bps/
	4800bps/2400bps
4.RX START SPEED	Sets the transmission speed for all documents you receive.
	33600bps/14400bps/9600bps/7200bps/
	4800bps/2400bps
2.UNIT NAME	You can register your name or your company name
	within 24 characters, including spaces. (→ p. 2-6)
3.TX TERMINAL ID	Prints your ID (Transmitting Terminal ID) on each page
	you transmit. (→ p. 2-4)
ON	After you turn the terminal ID on, you can do the
	following settings.
1.TTI POSITION	OUTSIDE IMAGE: Terminal ID is printed outside the
	image border.
	INSIDE IMAGE: Terminal ID is printed inside the image
	border.
2.TEL NUMBER MARK	Selects the prefix for the identification header number.
	FAX, TEL
OFF	No terminal ID is printed on the pages you send.
4.DENSITY CONTROL	Sets the density of the documents. Nine levels of the
	density are provided.
1.LIGHT	Sets for dark documents.
	The density suitable for dark documents can be adjusted
	with four levels.
2.STANDARD	Sets for standard documents. The density suitable for
	standard documents can be adjusted with three levels.
3.DARK	Sets for light documents. The density suitable for light
	documents can be adjusted with four levels.
5.OFFHOOK ALARM	Enables/disables the offhook alarm that alerts you when
	the handset is not in the handset cradle.
ON	After reception, the offhook alarm sounds when the
	handset of extension telephone is left off the hook.
OFF	No offhook alarm.

10-4