Canon FAX-L400 manual Receiving Faxes Manually, If you hear a person’s voice

Page 60

Receiving Faxes Manually

In Manual mode, if you connect a telephone to your machine, you can receive voice calls as well as manually activate reception of faxes. You can activate reception from the machine or from the telephone connected to the machine (this is called Remote receiving).

• For this mode, you need to connect a telephone to your machine. (→ Set-up Guide) NOTE • Make sure there are no documents in the ADF.

• Make sure the REMOTE RX setting is enabled. (→ p. 10-7)

• If your telephone line uses rotary pulse and the telephone connected to the machine can not be switched to tone dialling, you can not activate Remote receiving.

1

Make sure Manual is displayed in the LCD.

 

 

 

 

 

 

 

03/12

2002 TUE 16:12

 

 

Ex:

Manual

STANDARD

 

 

• To set Manual → p. 5-2.

 

 

 

 

2

Make sure you have connected a telephone to the machine.

 

 

 

 

3

When you hear the telephone ring, pick up the handset.

 

❚ If you hear a person’s voice:

4

 

Start your conversation. If the caller wants to send a fax after talking to you, ask them to press start on their fax

machine.

When you hear a slow beep, press Start on the machine to begin receiving the fax. Hang up the handset.

❚ If you hear a slow beep tone or silence:

Someone is trying to send you a fax.

If the telephone is close to your machine, press Start on the machine to begin receiving the fax. Hang up the handset.

 

• If no paper is loaded in the cassette, the LCD displays SUPPLY REC. PAPER. When paper is loaded,

NOTE

the machine automatically resumes printing.

•If the telephone is located away from your machine, dial 25 (the remote receiving ID) on your telephone and hang up. When your telephone line uses rotary pulse, switch to tone dialling on your telephone before dialling 25 (the remote receiving ID).

•You can change the number for the remote receiving ID, with a combination of two characters using 0 to 9, T and #, or disable remote receiving. (→ p. 10-7)

•If you have an answering machine connected to your machine that can carry out remote-control operations (controlling your answering machine from a remote telephone), the security code for this

function may be the same as the remote receiving ID. If so, make sure you change the machine’s remote receiving ID to make it distinct from the answering machine’s security code. (→ p. 10-7)

•The machine will beep and HANG UP PHONE will be displayed if the handset is not hung up properly.

Make sure the handset is placed properly in its cradle. If you do not want the machine to beep, disable the OFFHOOK ALARM setting. (→ p. 10-4)

5

Receiving Faxes

5-5

Page 59 Page 61
Image 60
Page 59 Page 61
Contents FacsimileFacsimile GuideGuide Using Your Documentation CopyrightTrademarks Set-up Guide Quick Reference Guide User’s GuideModel Name H12257 FAX-L400Contents Receiving Faxes Appendix Specifications Type Conventions Used in This Guide → User’s GuideIntroduction Customer SupportOperation Panel One-touch Panel Closed Hook KeyFax Resolution Key Use/Memory indicatorAlarm indicator Stop/Reset KeyReceive Mode Key Delayed Transmission KeyOne-touch Panel Opened Memory Reference KeyStandby Display Guidelines for Entering Letters, Symbols, and Numbers Registering InformationMethods of Registering Information in the Machine Continue entering other letters using the numeric keys Entering SymbolsEntering Letters Press T to switch to number mode Press the numeric key Continue entering other numbers using the numeric keysCorrecting a Mistake What is Sender Information? Registering Sender InformationUse 4 -or e + to select 7.TIMER Settings Press Stop/Reset to return to standby displayEntering the Date and Time Press Additional FunctionsUse 4 -or e + to select 4.FAX Settings → press OK four times Registering Your Fax/Telephone Number and NameUse 4 -or e + to select 8.PRINT Lists → press OK twice Setting the Telephone Line Type Use 4 -or e + to select 2.TEL Line Type → press OKDialling Through a Switchboard Use 4 -or e + to select 4.FAX Settings → press OK twiceUse 4 -or e + to select 6.R-KEY Setting → press OK Use 4 -or e + to select PBX → press OKIf you selected Hooking in step Press OKIf you selected Prefix in step Press Redial/Pause to enter a pause → press OKWhat is Speed Dialling? Speed DiallingSpeed Dialling Methods One-touch Speed Dialling Registering Numbers for One-touch Speed DiallingChanging/Deleting a One-touch Speed Dialling Entry To change a one-touch speed dialling entryCoded Speed Dialling Registering Numbers for Coded Speed DiallingUse 4 -or e + to select 5.ADD. Registration → press OK Use 4 -or e + to select 2.CODED SPD Dial → press OKPress OK Press Stop/Reset to return to standby display Changing/Deleting a Coded Speed Dialling EntryTo change a coded speed dialling entry Group Dialling Creating GroupsUse 4 -or e + to select 3.GROUP Dial → press OK To register a group under a one-touch speed dialling keyTo enter a destination registered for coded speed dialling Speed Dialling Lists Printing Speed Dialling ListsUse 4 -or e + to select 8.PRINT Lists → press OK Use 4 -or e + to select 2.SPEED Dial List → press OKOne-touch List Coded Dial ListCancelling the Printout List Use 4 -or e + to select 3.CANCEL Report → press OKPress 4 -for YES Group Dial ListPage Adjusting the Quality of Your Faxes Setting the Scanning ResolutionSending Faxes Preparing to Send a FaxPress FAX → Fax Resolution to select the resolution Setting the Scanning Density When the Fax Number is Not Registered in the MachineWhen the Fax Number is Registered in the Machine Dialling MethodsRegular Dialling One-touch Speed Dialling Coded Speed Dialling Group DiallingDirectory Dialling Press DirectoryPress 4 -or e + to display the other names Press FAX to set to Fax mode Using the ADFSending Methods Memory SendingUsing the Platen Glass Press Start to begin scanning for sendingPress Function → Book Sending Press 4 -or e + to select the document sizePress Start to begin scanning Cancelling Sending Cancelling Memory SendingPress Stop/Reset → OK Press Stop/ResetRedialling When the Line is Busy Cancelling Manual RediallingCancelling Automatic Redialling Manual RediallingSequential Broadcasting Sending a Document to More Than One DestinationOne-touch speed dialling Coded speed diallingRegular dialling RediallingPress Start Delayed Sending Press Function → Delayed TransmissionConfirming Transmission Status and Sending Reservation Confirming Transmission StatusPress System Monitor Confirming Sending Result and Reservation Press 4 -or e +, to select 2.TX/RX Result → press OKDocuments Stored in Memory Printing a List of Documents in MemoryPress Function Press Memory Reference → OK Resending a Document in Memory Press Function → Memory ReferenceUse 4 -or e + to select 3.RESEND Document → press OK Enter the fax numberPrinting a Document in Memory Use 4 -or e + to select 3.PRINT Document → press OKDeleting a Document from Memory Use 4 -or e + to select 4.DELETE Document → press OKPress 4 -to delete the document Page Receiving Faxes Different Ways to Receive a FaxSetting the Receive Mode Press Receive Mode until the mode you want appearsSetting the Options for FaxTel Mode What Happens When FaxTel Mode is SelectedUse 4 -or e + to select 4.FAX Settings → press OK Use 4 -or e + to select 4.RX Settings → press OKUse 4 -or e + to select 2.FAX/TEL OPT.SET → press OK twice Use 4 -or e + to select Receive or Disconnect → press OKReceiving Faxes Manually If you hear a person’s voiceIf you hear a slow beep tone or silence Receiving Faxes in Memory When a Problem Occurs Cancelling ReceivingPress 4 -to cancel receiving Receiving Faxes While Performing Other TasksUsing Polling What Is Polling?Before You Use Polling Receiving Polling Other Fax Machines to Receive a Document Use 4 -or e + to select 2.POLLING RX → press OKDial the other party’s number Setting Up Polling Sending Setting Up a Polling BoxBefore You Can Be Polled to Send Use 4 -or e + to select 2.PASSWORD → press OK Press Stop/Reset to return to the Standby displayUse 4 -or e + to select 3.ERASE After TX → press OK Scanning a Document into the Memory for Polling Sending Place your documents on the machinePress Function → Polling Changing the Polling Box Settings Use 4 -or e + to select 2.CHANGE Data → press OKDeleting a Polling Box Use 4 -or e + to select 3.DELETE File → press OKPage Special Features Use the numeric keys to dial the international access codeSpecial Dialling Dialling an Overseas Number With PausesPause at the end of a number P is fixed to 10 seconds Switching Temporarily to Tone Dialling Dialling Through a Switchboard Confirming a Dial TonePress Function → D.T. for dial tone detection Continue with the operation you are performingUse 4 -or e + to select 7.SYSTEM Settings → press OK Restricting Use of Your MachineEnabling Restriction of Your Machine Use 4 -or e + to select 2.LOCK Phone → press OKCancelling Restriction of Your Machine Reports and Lists Summary of Reports and ListsPress Function → Report Use 4 -or e + to select 1.ACTIVITY Report → press OKTX Transmission Report Slerexe Company LimitedRX Reception Report Multi TX/RX Transaction ReportTroubleshooting LCD MessagesFaxing Problems Sending ProblemsYou can not send a fax Can not send using Error Correction Mode ECM Errors occur frequently while sendingFaxes sent from the machine are spotted or dirty Receiving Problems Can not receive a fax automaticallyCan not receive a document manually Can not receive a fax using Error Correction Mode ECM Errors occur frequently while receivingPrint quality is poor Faxes do not printTelephone Problems If a Power Cut OccursYou can not dial Telephone disconnects while you are talkingIf You Can not Solve the Problem Page Setting the Additional Functions Accessing the Additional FunctionsUnderstanding the Additional Functions Use 4 -or e + to select the submenu you want to changeMenu Descriptions 10-210-3 FAX Settings 10-410-5 10-6 10-7 10-8 Delete FileSelects the country where you are using your machine 10-9ADD. Registration 10-10Print Lists 10-1110-12 Specifications FacsimileTelephone Page Index Document Memory List Memory Clear Report Redial Standard Memo Memo Memo 33126U.S.A
Top Page Image Contents