Energy Saver Mode
This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode.
• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30
NOTE | minutes. You can also turn off the energy saver function. (→ p. |
|
•The energy saver function does not activate when the machine is in the following status:
–When printing out copies, faxes* or other pages
–When sending or receiving faxes*
–While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator lights up*
–When paper jams occur
–When an error code appears and the Alarm indicator flashes
–When no paper is loaded in the cassette or
–When PRESS OK KEY is displayed
*Only for the
Setting the Energy Saver Mode Manually
1Press Energy Saver.
• The LCD is turned off and the Energy Saver key lights up.
• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait
NOTE | about 2 seconds before pressing Energy Saver. |
|
1
Introduction
Restoring from the Energy Saver Mode
1Press Energy Saver.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately. However, it may vary according
NOTE | to room temperature and circumstances. |
|