Installing the 82357A
Step 3: Connecting the 82357A
USB Cable
82357A
USB Cable |
| |
Self- |
| |
| Powered |
|
| USB Hub | USB Cable |
|
|
82357A
4Observe the LEDs. Observe the LEDs on the 82357A for at least 10 seconds. See Chapter 2 - Using the 82357A for a description of the normal LED sequence with an initial installation of an 82357A.
aInitially, only the red FAIL LED should be ON. After a few seconds, all three LEDs should be ON. All three LEDs ON shows the 82357A has been successfully installed, but is not yet configured for use with the Agilent IO Libraries.
bIf all three LEDs are not ON after 10 seconds and all Windows Plug and Play Manager activity has ceased, STOP. See Chapter 3 - Troubleshooting the 82357A for diagnostics information.
cIf all three LEDs are still ON after 10 seconds, go to “Observing Windows Plug and Play Manager Sequence (Windows XP Only)”.
16 | Chapter 1 |