Introduction
Before You Begin
Installation & Configuration | Troubleshooting | FAQ | Glossary | License |
To avoid damaging your
Communications Gateway or computer with static electricity:
Always make the wall connection first.
Before you connect or disconnect the USB or Ethernet cable, always touch the coaxial cable connector on the Communications Gateway.
Precautions
Postpone Communications Gateway installation until there is no risk of thunderstorm or lightning activity in the area.
To avoid damaging the Communications Gateway with static electricity:
■Always first connect the coaxial cable to the grounded cable TV wall outlet.
■Before you connect or disconnect the USB or Ethernet cable from your Communications Gateway or PC, always touch the coaxial cable connector on the Communications Gateway to release any static charges.
To prevent overheating the Communications Gateway, do not block the ventilation holes.
Do not open the Communications Gateway. Refer all service to your service provider.
Wipe the Communications Gateway with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.
Home | X | 8 | Communications Gateway User Guide | |
Exit |
|
|