Motorola Communications Gateway manual Introduction, Telephone Communications

Page 6

Introduction

Before You Begin

Installation & Configuration

Troubleshooting

FAQ

Glossary

License

IP telephony converges with cable data service in one convenient package!

You can place your Communications Gateway on your desktop or mount the unit as described in “Wall Mounting” on page 50.

Introduction

Congratulations, you have a new Motorola® Communications Gateway! It provides the following converged services over a single coaxial cable (coax) network:

Up to two telephone lines for voice and/or fax communication

High-speed access to the Internet and other online services

Telephone Communications

You can connect up to two phone lines using your Motorola Communications Gateway. The Communications Gateway supports voice over Internet Protocol (VoIP) to provide:

Connections to two standard telephone lines

Standard features such as caller ID, call waiting, and call forwarding

Software upgrades over the network to provide new or improved services

Battery back-up during power interruptions through a built-in uninterruptible power supply (UPS)

Just pick up your phone and talk!

Home

Print

X

1

Communications Gateway User Guide

Exit

 

 

Image 6
Contents Communications Gateway User Guide Home Print Iii Contents Replacing the Battery Wall Mounting Troubleshooting Introduction Telephone CommunicationsHigh-Speed Internet Access FasterTop and Front Panel Light DescriptionTop and Front Panel Connector Panel Battery Compartment Item DescriptionBefore You Begin Precautions Always make the wall connection firstPrecautions Signing Up for Service Cable Data ServiceTelephone Service Computer System Requirements Ethernet CardUSB Connection Installation and Configuration Overview Hand-tighten the connectors to avoid damaging them Cabling and Startup for a Single UserCabling and Startup for a Single User Cabling and Startup for a Single User Cabling and Startup for a Single User Cabling and Startup for a Single User Immediately plug the power cord into the electrical outlet To telephone lines Configure TCP/IP following one Setting Up a USB Driver Setting Up a USB Driver in Windows 98 SE Setting Up a USB Driver in Windows 98 SE Select The updated driver... and click Next Setting Up a USB Driver in Windows 98 SE Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Me Setting Up a USB Driver in Windows XP Configuring TCP/IP Configuring TCP/IP in Windows 95, 98, or Me Configuring TCP/IP in Windows 95, 98, or Me Click Obtain an IP address automatically Configuring TCP/IP in Windows 2000 or XP Configuring TCP/IP in Windows 2000 or XP Configuring TCP/IP in Windows 2000 or XP Configuring TCP/IP in Windows 2000 or XP Verifying the IP Address in Windows 95, 98, or Me Verifying the IP Address in Windows 2000 or XP Verifying the IP Address in Windows 2000 or XP Cabling for Multiple Users Ethernet and USBEthernet Replacing the Battery Replacing the Battery Replacing the Battery Replacing the Battery Replacing the Battery Wall Mounting Print the Wall Mounting Template on If necessary, seat an anchor in each hole 125.0 mm Inches Troubleshooting Problem Possible SolutionsCannot send or receive data Lights and Error Conditions Light During Startup During Normal OperationRemoving the USB Driver from Windows 98 or Me Troubleshooting Troubleshooting Troubleshooting Click Settings Removing the USB Driver from Windows 2000 or XPSelect Uninstall/Unplug a device and click Next Troubleshooting Troubleshooting Troubleshooting Click Remove Driver Contact Us Frequently Asked Questions What is high-speed cable Internet access?What are CableLabs Certified, Docsis and EuroDOCSIS? What type of technical support is available? Glossary Coaxial cable coaxType connector Pstn VoIP Software License Government Restricted Rights 493049-001 02MGBI English