Motorola Communications Gateway manual Setting Up a USB Driver in Windows XP

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Setting Up a USB Driver in Windows XP

Be sure the Motorola Communications Gateway CD-ROM is inserted into the CD-ROM drive before you plug in the USB cable. A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed.

1Be sure “Install the software automatically” is selected.

2Click Next.

Although your Motorola Communications Gateway model number may be different than in the images in this guide, the procedure is the same.

3Click Finish to complete the installation.

When you have successfully finished setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 2000 or XP” on page 36.

Home	Print	X	31	Communications Gateway User Guide
		Exit