Motorola Communications Gateway manual Configuring TCP/IP in Windows 2000 or XP

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Configuring TCP/IP in Windows 2000 or XP

The following instructions are for Windows 2000 or XP. For Windows 95, 98, or Me, see “Configuring TCP/IP in Windows 95, 98, or Me” on page 33. For a Macintosh or UNIX system, refer to your user guide.

1On the Windows Desktop, click Start.

2Select Settings and then Control Panel from the pop-up menus.

3On the Control Panel window, double-click the Network and Dial-up Connections icon.

4On the Network and Dial-up Connections window, click Local Area Connection number. The value of number varies from system to system. The Local Area Connection number Status window is displayed.

Home	Print	X	36	Communications Gateway User Guide
		Exit