Total Access 600 Series SHDSL IAD User Interface
Page 22
Level
This is the security level granted to the user.
>Maint Port Menu
The Total Access 600’s VT 100 port can be accessed via an
Password Protect
When set to , the maintenance port is not password protected. When ; (def), the Total Access 600 will prompt for a password upon startup.
Password
This is the text string that is used for comparison when password protecting the maintenance port. By default, no password is entered.
If you forget your password, type CHALLENGE in all capital letters. Call technical support and have the displayed CHALLENGE code ready.
The security level for the maintenance port is always set to 0. This gives full access to all menus.
Passwords are
Instructions for Changing Passwords
Step | Action |
1Select the PASSWORD
2Type the new password in the ENTER field.
3Type the new password again in the CONFIRM field.
The password can contain up to 12 alphanumeric characters. You can also use spaces and special characters in the password.
Total Access 600 Series User Manual | © 2002, ADTRAN, Inc. |