ADTRAN 600 Series user manual Configuring the Router Status, Router/Status Menu

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B Page 44

FILTER LIST NAME

NEXT OPER

￿￿

￿￿

Selects between filters defined in the list.

The next operation to use to combine with the next filter in the list:

the last filter to combination.

logically AND this filter with the next filter in the list.

￿￿ logically OR this filter with the next filter in the list.

LAN-TO-WAN (Out)

The packets which come out toward the WAN from the TA600 can be filtered in three ways:

DISABLED (*￿%6￿	Turns off packet input filtering. No outgoing packets
	are blocked.
BLOCK ALL	All outgoing packets to the WAN are blocked except as
	defined in the FILTERS/OUT EXCEPTIONS list.
FORWARD ALL	All outgoing packets to the WAN are not blocked ex-
	cept as defined in the FILTERS/OUT EXCEPTIONS list.

Out Exceptions

This is a list of up to 32 filter entries. The setup is exactly the same as the ￿￿!￿￿￿￿￿￿￿￿￿-￿￿1￿￿￿￿￿list.

Configuring the Router – Status

Use the ￿￿￿￿￿￿￿￿￿￿￿￿￿￿menu to view and set the parameters shown in Figure 13. The ￿￿￿￿￿￿￿￿￿￿￿￿￿

screens give the user useful information for debugging the current routes in the Total Access 600.

Figure 13. Router/Status Menu

Total Access 600 Series User Manual © 2002, ADTRAN, Inc.