ADTRAN 600 Series user manual This is the username used to authenticate the PPP peer

Page 41

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B Page 41

TX Username

This is the username that is used when being authenticated by the PPP peer.

TX Password

This is the password or secret that is used when being authenticated by the PPP peer.

RX Username

This is the username used to authenticate the PPP peer.

RX Password

This is the password or secret that is used to authenticate the PPP peer.

IP

The IP menu contains the parameters for exchanging IP data with the PPP peer.

Mode

Setting to ON (def) will permit this connection profile to negotiate PPP IPCP with the PPP peer for exchanging of IP packets.

Local IP

This is the IP address that is assigned to the PPP link when using numbered links. Leaving this as

0.0.0.0means the Total Access 600 will determine its IP address using PPP IPCP. If the far end router does not assign an IP address, the PPP link is left unnumbered.

Netmask

This network mask is applied to the IP/Local IP address for determining the PPP peer's network. If left as 0.0.0.0, a standard network mask is used.

Remote IP

The PPP peer's IP address or network can be set here, if known. Leaving this at 0.0.0.0 means that the Total Access 600 will determine the PPP peer's IP and network using the PPP IPCP.

NAT

The Total Access 600 can perform Network Address Translation. This feature is most widely used when connecting to the Internet. The Ethernet network can consist of private network numbers. When this profile is connected, all IP addresses on the Ethernet side are translated into the one real IP address negotiated with the PPP peer (ISP). Multiple stations on the Ethernet side can access the Internet simul- taneously. Setting this option to ON will cause the Total Access 600 to perform NAT. In the OFF (def) position, the unit will route across the connection normally.

Route

The IP parameters are configured in this menu. Usually the Total Access 600 will automatically dis- cover the PPP peer's networks using PPP IPCP and/or RIP.

• Route/Static Route

Selecting yes will add a static route to the remote peer to the route table.

• Route/Private

Selecting yes will prevent this route from being advertised.

• Route/Hops (1-16)

This value is the metric or number of hops that RIP will use in advertising the static route. The range is 1 to 16, where 1 is the default. The value 16 is considered an infinite distance (poisoned route).

© 2002, ADTRAN, Inc.

Total Access 600 Series User Manual

Image 41
Contents Total Access 600 Series Shdsl IAD To the Holder of the Manual TrademarksSafety Instructions 2002, ADTRAN, Inc 2002, ADTRAN, Inc 2002, ADTRAN, Inc Limited Product Warranty Warranty and Customer ServicePre-Sales Inquiries and Applications Support Customer Service, Product Support Information, and TrainingRepair and Return Training Installation and Maintenance SupportPost-Sale Support Total Access 600 Series Shdsl IAD User Interface Guide +@A1 +@&.&$$ +@,%.% @/& % @/& %.&$$ @.&$$ @/1 @.%+0% %B,% ##%B 8= $*+*$&,$&-# # #$% Figures Analog Lifeline Firmware UpdatesVoice Over DSL Overview Voice over DSL System Info Part Number Bootcode RevisionSerial Number Firmware RevisionNetwork Timing Mode System ConfigTelnet Access Telnet User ListInstructions for Changing Passwords Step Action Password ProtectMaint Port Menu LevelNetwork Time System Utility Upgrade FirmwareConfig Transfer Ping ATM Config Configuring WAN SettingsDslam Type Layer One InterfaceData Scrambling ATM StatsAP Rx Cells AP Receive Cell ErrorsAP Rx OAM Cells AP Receive Cells DiscardedAAL5 Receive Discarded Frames AAL5 Receive ErrorsAAL5 No ATM Frames AAL5 No Data PacketsGlobal Configuring the Router ConfigurationText string used to represent the domain name Bridge Dotted decimal format Security2002, ADTRAN, Inc Ethernet Menu EthernetMAC Address Use this menu to enable RIP on the LAN interfaceWAN This selection enables IP on this PVC PPPoATM RFC 1483 BridgeThis is the username used to authenticate the PPP peer Only routes not learned on the WAN connection This is the PPP encapsulation. LLC or VC-Mux Router/Status Menu Configuring the Router StatusConfiguring the Router Logs PPP Log Sys log HostConnection Log Network LogCall Control Configuring Voice Support ConfigGateway Stats Configuring Voice Support StatusPVC Stats Pots StatsTest Managing the Modules ModulesMenu FXS Mode Managing the Modules V.35 SetupConfiguration Following settings are used for FRF5 Following settings are used for FRF8 Updating Firmware via a Forced Download Appendix A. Updating Total Access 600 Firmware using XmodemPress $until a menu appears Select -# # for #9 When prompted, press to erase flashUpdating Firmware via the Console Menus Appendix B. Updating Total Access 600 Firmware using Tftp Message Meaning Message Meaning System Time Status Bar ModeMenu Path Left Pane Right Window Pane Notation Window Pane NavigationNavigating Using the Keyboard Keys Additional Terminal Menu Window FeaturesSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix E. RFC1483 Quick Start IP Routing IP Routing Step Action Options Appendix F. RFC1483 Quick Start IP Routing with NATBridging Step Action Appendix G. RFC1483 Quick Start BridgingAppendix H. Craft Port Connection Pin-out 2002, ADTRAN, Inc