ADTRAN 600 Series user manual Managing the Modules Modules, Menu, Test

Page 49

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B

Page 49

Managing the Modules – Modules

Use the # !menu to view and set the parameters shown in Figure 17. The Total Access 600 contains four fixed modules: The WAN/Network interface, FXS, Echo Canceller/ADPCM module, and the V.35 interface. The # : ! table allows management of the on-board modules in the Total Access 600.

This menu contains #, !#, , and indicators/menus customized for each module.

Figure 17. Modules Menu

>NET (SHDSL)

Menu

Data Rate

Used to select data rate of the network connection. (This should match the DSLAM settings.)

Frame Mode

Used to select either SDSL Framed (def) or SDSL Framed Plesiosynchronous with bit stuffing. (This should match the DSLAM settings.)

Annex A/B

Used to select ->-0>or both.

ITU-991.2/Gspan

Chooses between :))? or 2!01?.

Test

These tests are meant for debug purposes only. A reboot may be required to return the Total Access 600 to normal operation.

Network Loopback

Sets the network interface in loopback mode.

© 2002, ADTRAN, Inc.

Total Access 600 Series User Manual

Image 49

Contents Total Access 600 Series Shdsl IAD To the Holder of the Manual TrademarksSafety Instructions 2002, ADTRAN, Inc 2002, ADTRAN, Inc 2002, ADTRAN, Inc Limited Product Warranty Warranty and Customer ServiceRepair and Return Customer Service, Product Support Information, and TrainingPre-Sales Inquiries and Applications Support Post-Sale Support Installation and Maintenance SupportTraining Total Access 600 Series Shdsl IAD User Interface Guide +@A1 +@&.&$$ +@,%.% @/& % @/& %.&$$ @.&$$ @/1 @.%+0% %B,% ##%B 8= $*+*$&,$&-# # #$% Figures Analog Lifeline Firmware UpdatesVoice Over DSL Overview Voice over DSL System Info Part Number Bootcode RevisionSerial Number Firmware RevisionNetwork Timing Mode System ConfigTelnet Access Telnet User ListInstructions for Changing Passwords Step Action Password ProtectMaint Port Menu LevelNetwork Time System Utility Upgrade FirmwareConfig Transfer Ping ATM Config Configuring WAN SettingsDslam Type Layer One InterfaceData Scrambling ATM StatsAP Rx Cells AP Receive Cell ErrorsAP Rx OAM Cells AP Receive Cells DiscardedAAL5 Receive Discarded Frames AAL5 Receive ErrorsAAL5 No ATM Frames AAL5 No Data PacketsGlobal Configuring the Router ConfigurationText string used to represent the domain name Bridge Dotted decimal format Security2002, ADTRAN, Inc Ethernet Menu EthernetMAC Address Use this menu to enable RIP on the LAN interfaceWAN This selection enables IP on this PVC PPPoATM RFC 1483 BridgeThis is the username used to authenticate the PPP peer Only routes not learned on the WAN connection This is the PPP encapsulation. LLC or VC-Mux Router/Status Menu Configuring the Router StatusConfiguring the Router Logs PPP Log Sys log Host Connection Log Network LogCall Control Configuring Voice Support ConfigGateway Stats Configuring Voice Support StatusPVC Stats Pots StatsMenu Managing the Modules ModulesTest FXS Configuration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 Updating Firmware via a Forced Download Appendix A. Updating Total Access 600 Firmware using XmodemPress $until a menu appears Updating Firmware via the Console Menus When prompted, press to erase flashSelect -# # for #9 Appendix B. Updating Total Access 600 Firmware using Tftp Message Meaning Message Meaning Menu Path Left Pane Status Bar ModeSystem Time Right Window Pane Notation Window Pane NavigationNavigating Using the Keyboard Keys Additional Terminal Menu Window FeaturesSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix E. RFC1483 Quick Start IP Routing IP Routing Step Action Options Appendix F. RFC1483 Quick Start IP Routing with NATBridging Step Action Appendix G. RFC1483 Quick Start BridgingAppendix H. Craft Port Connection Pin-out 2002, ADTRAN, Inc