ADTRAN 600 Series user manual Warranty and Customer Service, Limited Product Warranty

Page 7

Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31B

Page 7

Warranty and Customer Service

ADTRAN will repair and return this product within ten years from the date of shipment if it does not meet its published specifications or fails while in service. For detailed warranty, repair, and return information refer to the ADTRAN Equipment Warranty and Repair and Return Policy Procedure.

Return Material Authorization (RMA) is required prior to returning equipment to ADTRAN.

For service, RMA requests, or further information, contact one of the numbers listed at the end of this section.

LIMITED PRODUCT WARRANTY

ADTRAN warrants that for ten years from the date of shipment to Customer, all products manufactured by ADTRAN will be free from defects in materials and workmanship. ADTRAN also warrants that products will conform to the applicable specifications and drawings for such products, as contained in the Product Manual or in ADTRAN's internal specifications and drawings for such products (which may or may not be reflected in the Product Manual). This warranty only applies if Customer gives ADTRAN written notice of defects during the warranty period. Upon such notice, ADTRAN will, at its option, either repair or replace the defective item. If ADTRAN is unable, in a reasonable time, to repair or replace any equipment to a condition as warranted, Customer is entitled to a full refund of the purchase price upon return of the equipment to ADTRAN. This warranty applies only to the original purchaser and is not transferable without ADTRAN's express written permission. This warranty becomes null and void if Customer modifies or alters the equipment in any way, other than as specifically authorized by ADTRAN.

EXCEPT FOR THE LIMITED WARRANTY DESCRIBED ABOVE, THE FOREGOING CONSTITUTES THE SOLE AND EXCLUSIVE REMEDY OF THE CUSTOMER AND THE EXCLUSIVE LIABILITY OF ADTRAN AND IS IN LIEU OF ANY AND ALL OTHER WARRANTIES (EXPRESSED OR IMPLIED). ADTRAN SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING (WITHOUT LIMITATION), ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THIS EXCLUSION MAY NOT APPLY TO CUSTOMER.

In no event will ADTRAN or its suppliers be liable to Customer for any incidental, special, punitive, exemplary or consequential damages experienced by either Customer or a third party (including, but not limited to, loss of data or information, loss of profits, or loss of use). ADTRAN is not liable for damages for any cause whatsoever (whether based in contract, tort, or otherwise) in excess of the amount paid for the item. Some states do not allow the limitation or exclusion of liability for incidental or consequential damages, so the above limitation or exclusion may not apply to Customer.

© 2002, ADTRAN, Inc.

Total Access 600 Series User Manual

Image 7
Contents Total Access 600 Series Shdsl IAD To the Holder of the Manual TrademarksSafety Instructions 2002, ADTRAN, Inc 2002, ADTRAN, Inc 2002, ADTRAN, Inc Limited Product Warranty Warranty and Customer ServiceRepair and Return Customer Service, Product Support Information, and TrainingPre-Sales Inquiries and Applications Support Post-Sale Support Installation and Maintenance SupportTraining Total Access 600 Series Shdsl IAD User Interface Guide +@A1 +@&.&$$ +@,%.% @/& % @/& %.&$$ @.&$$ @/1 @.%+0% %B,% ##%B 8= $*+*$&,$&-# # #$% Figures Analog Lifeline Firmware UpdatesVoice Over DSL Overview Voice over DSL System Info Firmware Revision Bootcode RevisionPart Number Serial NumberTelnet User List System ConfigNetwork Timing Mode Telnet AccessLevel Password ProtectInstructions for Changing Passwords Step Action Maint Port MenuNetwork Time System Utility Upgrade FirmwareConfig Transfer Ping Layer One Interface Configuring WAN SettingsATM Config Dslam TypeData Scrambling ATM StatsAP Receive Cells Discarded AP Receive Cell ErrorsAP Rx Cells AP Rx OAM CellsAAL5 No Data Packets AAL5 Receive ErrorsAAL5 Receive Discarded Frames AAL5 No ATM FramesGlobal Configuring the Router ConfigurationText string used to represent the domain name Bridge Dotted decimal format Security2002, ADTRAN, Inc Ethernet Menu EthernetMAC Address Use this menu to enable RIP on the LAN interfaceWAN This selection enables IP on this PVC PPPoATM RFC 1483 BridgeThis is the username used to authenticate the PPP peer Only routes not learned on the WAN connection This is the PPP encapsulation. LLC or VC-Mux Router/Status Menu Configuring the Router StatusConfiguring the Router Logs Network Log Sys log HostPPP Log Connection LogCall Control Configuring Voice Support ConfigPots Stats Configuring Voice Support StatusGateway Stats PVC StatsMenu Managing the Modules ModulesTest FXS Configuration Managing the Modules V.35 SetupMode Following settings are used for FRF5 Following settings are used for FRF8 Updating Firmware via a Forced Download Appendix A. Updating Total Access 600 Firmware using XmodemPress $until a menu appears Updating Firmware via the Console Menus When prompted, press to erase flashSelect -# # for #9 Appendix B. Updating Total Access 600 Firmware using Tftp Message Meaning Message Meaning Menu Path Left Pane Status Bar ModeSystem Time Right Window Pane Notation Window Pane NavigationNavigating Using the Keyboard Keys Additional Terminal Menu Window FeaturesSession Management Keystrokes Getting Help Application Diagram Voice Turn Up Step Action Appendix E. RFC1483 Quick Start IP Routing IP Routing Step Action Options Appendix F. RFC1483 Quick Start IP Routing with NATBridging Step Action Appendix G. RFC1483 Quick Start BridgingAppendix H. Craft Port Connection Pin-out 2002, ADTRAN, Inc