Total Access 600 Series SHDSL IAD User Interface
Max Config
This value is the number of unanswered
Max Timer
This value is the number of seconds to wait between unanswered configuration requests. The possible values are 1 sec, 2 secs (def), 3 secs, 5 secs and 10 secs.
Max Failure
Due to the nature of PPP, configuration options may not be agreed upon between two PPP peers. This value is the number of
Encapsulation
This is the PPP encapsulation. (LLC or VC-Mux)
Filters
The Total Access 600 can block packets in and out of a WAN port by use of the filters. They are set up in two steps: 1) define the types of packets that would be of interest in the CONFIGURATION/GLOBAL/ SECURITY/FILTER DEFINES menu, and 2) set up the filter type and combination of defines that will cause a packet block.
The packets which come into the Total Access 600 can be filtered in three ways:
DISABLED (*%6
BLOCK ALL
FORWARD ALL
In Exceptions
Turns off packet input filtering. No incoming packets are blocked.
All incoming packets from the WAN are blocked ex- cept as defined in the FILTERS/IN EXCEPTIONS list.
All incoming packets from the WAN are not blocked except as defined in the FILTERS/IN EXCEPTIONS list.
This is a list of up to 32 filter entries which can be combined using the operations field. The operations are performed in the order they appear on the list.
ACTIVE
TYPE
MAC
PATTERN
1
Turns this entry active when set to ON Selects the filter define list to reference:
from the CONFIGURATION/GLOBAL/SECURITY/FILTER DEFINES/MAC FILTER DEFINES list.
from the CONFIGURATION/GLOBAL/SECURITY/FILTER DEFINES/PATTERN FILTER DEFINES list.
from the CONFIGURATION/GLOBAL/SECURITY/FILTER DEFINES/IP FILTER DEFINES list.
from theCONFIGURATION/GLOBAL/SECURITY/FILTER DEFINES/IPX FILTER DEFINES list.
© 2002, ADTRAN, Inc. | Total Access 600 Series User Manual |