3Com 3C389 manual Windows 95 OSR 2 Installation, Windows for Workgroups/NDIS 2 Installation

Page 28

3-4CHAPTER 3: INSTALLING THE NETWORK DRIVERS

Windows 95 OSR 2 Installation

1If you have not already inserted the 3C389 PC Card, insert it now with cable attached.

The PC does not detect the 3C389 PC Card if the cable is detached.

If PCMCIA support has been started on your machine, the system will prompt you for a diskette.

If PCMCIA support has not been started on your machine, complete the following sub steps.

a Click Start, Settings, and Control Panel.

b Click PC Card (PCMCIA) to start PCMCIA support, and follow the instructions given.

2When the Update Device Driver Wizard appears, insert TokenDisk diskette #2 and click Next to search the diskette for the driver.

3If the driver is not found on the diskette, click Other Locations and type:

a:\win95

4When the driver is found, click Finish.

5Set the parameters.

The system will list acceptable default values.

6Follow the displayed instructions to copy the ﬁles.

Windows OSR 2 PC Card software installation is now complete.

Windows for Workgroups/NDIS 2 Installation

If you are installing the 3C389 PC Card in a PC that already has Windows for Workgroups installed, refer to the Microsoft Windows for Workgroups User's Guide for instructions on how to install and conﬁgure a third-party device driver.

Image 28

Contents TokenLink Velocity Token Ring LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Lanaid and IBM LAN Client Using a Memory Manager Figures Tables Lifetime Limited Warranty Asia Japan Australia, New Zealand Sweden, Finland, NorwayDenmark Belgium, Netherlands, Luxembourg United Kingdom, EireAbout this Guide How to Use This GuideIf you are looking for Turn to Icon Alerts you to ConventionsConvention Description Product Features Introduction2CHAPTER 1 Introduction Pcmcia Advantages Point EnablersDisadvantages Socket Services Card ServicesDisadvantage Card and Socket Services Versus Point Enablers Card Services EnablerSuper Client Drivers Autoset Mode Installing Kit ContentsInstallation Tips Installing the 3C389 PC Card1Attaching the Cable to the 3C389 PC Card Installing the 3C389 PC Card Connect the PC Card cable to the network port 3Modular UTP Cable for the 3C389 PC CardTurn on the power to the PC Removing the 3C389 PC CardLanaid is not required to conﬁgure the following drivers Installing the Network DriversLanaid is required to conﬁgure the following drivers Windows 95 Installation Set the displayed parameters Determine if you have OSRFollow the instructions to copy the ﬁles Windows 95 OSR 2 Installation Windows for Workgroups/NDIS 2 InstallationWhen the driver is found, click Finish Set the parameters Follow the displayed instructions to copy the ﬁlesSee for information on how to use Lanaid Windows NT 3.51 Installation Using Memory ManagementControl Panel Window, double-click the Network icon Set the displayed parameters and click OKWindows NT 4.0 Installation Click the Adapters tab Click AddNovell NetWare Client 32 for Windows 95 Installation Click InstallClick OK when the Installation Complete message appears TypeClick OK when you have completed your selections for the NIC Click Conﬁgure in the main menuDOS Client 16 for Novell NetWare 4.01 and Above Installation Start Mpts by performing either of the following actions Click OK on the Mpts logo panel Click Install IBM LAN Support Program/Native Installation Insert TokenDisk diskette #2 into the ﬂoppy drive and typeUsing Memory Management Lanaid IBM LAN Client Net AddressInstalling Lanaid Using Lanaid to Install IBM LAN Client Launch LanaidIBM LAN Client Conﬁguration window appears Client or Protocol DescriptionClick OK and click Close Using Lanaid to Conﬁgure the 3C389 PC Card Click Suggest to have Lanaid suggest non-conﬂicting valuesClick Exit to return to DOS Reboot your PC Running Lanaid From the Command LineClick Done Troubleshooting 2CHAPTER 5 Troubleshooting Error Codes OS/2 Ndis Error CodesError Code Explanation and Action TOKENCS.COM Dxmcsmod Error Codes DxmcsmodIf EMM386.EXE is in your CONFIG.SYS, comment it out Troubleshooting Windows 95 NdisClick the Resources tab of the dialog box Troubleshooting Windows NT Ndis Running the Diagnostics ProgramSelect Properties Select the Adapter tab Test Options Diagnostics Error Codes and Suggested Actions Initialization Error CodesOpen Errors Open Error CodesPhases ErrorsSuggested Actions in Response to Open Errors Value MeaningError Code Explanation Action Error Code Explanation Action Running the Diagnostics Program Transmit Error Codes Number DescriptionStrippedfs Using a Memory Manager Memory Managers with Point EnablerMemory Managers with Card and Socket Services For compatibility modeMemory Managers with Card and Socket Services Phoenix Card Services IBM Card ServicesExpanded Memory Speciﬁcation DEVICE=C\DOS\EMM386.EXE RAM 1024 X=D000-D1FF FRAME=C000 Socket Services Specifics System Soft CardHOT-PLUGGABILITY and C SUSPEND/RESUME Click the 3C389 PC Card icon on the status bar Windows 95 NdisClick Stop DOS ODI Hot-Pluggability and Suspend/Resume DOS Ndis Hot-PluggabilityUnload all the drivers Remove the card from your machineOS/2 Ndis Hot-Pluggability and Suspend/Resume Online Technical Services World Wide Web Site3Com Bulletin Board Service 3ComFacts Automated Fax ServiceAccess by Analog Modem Access by Digital ModemLog on to CompuServe 3ComForum on CompuServe Online ServicePress Return to see the 3ComForum main menu Support from 3Com Support from Your Network SupplierRegional Sales Office Telephone Number 3Com Corporation Regional Sales Office Telephone Number 3Com Asia Limited 3Com Benelux B.V3Com Canada 3Com European HQReturning Products for Repair Index NumbersLanaid 3Com Corporation Limited Warranty FCC Class B Certification Statement Vcci Class 2 Statement United States Government Legend