3Com 3C389 manual Novell NetWare Client 32 for Windows 95 Installation, Click Install, Type

Page 33

Novell NetWare Client 32 for Windows 95 Installation

3-9

Novell NetWare Client 32 for Windows 95 Installation

1Click Remove PC Cards from the Network Control Panel for any PC Cards that are no longer in the system or that you are removing.

2In a DOS window, change to the \windows\inf subdirectory.

3Delete the TOKENCS.INF ﬁle.

4Copy the new .INF ﬁle for your driver from the TokenDisk diskette #2 \novell\netware directory into the \windows\inf directory.

5Complete the Client 32 installation.

6Reboot the machine to effect the changes and load the new driver.

Novell NetWare Client 32 for Windows 95 installation is now complete.

OS/2 NDIS 2 Device Driver Using LAN Adapter Protocol Support (LAPS)

If your OS/2 network operating system has not yet been installed on your PC, install it now and follow its instructions for installing device drivers. If an OS/2 network operating system has previously been installed, follow the instructions here for using LAPS to install device drivers.

1Insert TokenDisk diskette #2 into the ﬂoppy drive.

2Enter laps at the OS/2 prompt.

LAPS is usually located in the \ibmcom subdirectory on the boot drive.

3Click Install.

You will be prompted for the source of the .NIF ﬁle.

4Type:

a:[Enter]

5Click OK when the Installation Complete message appears.

You will return to the main menu.

Image 33

Contents TokenLink Velocity Token Ring LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Lanaid and IBM LAN Client Using a Memory Manager Figures Tables Lifetime Limited Warranty Australia, New Zealand Sweden, Finland, Norway Asia JapanDenmark Belgium, Netherlands, Luxembourg United Kingdom, EireHow to Use This Guide About this GuideIf you are looking for Turn to Conventions Icon Alerts you toConvention Description Introduction Product Features2CHAPTER 1 Introduction Pcmcia Point Enablers AdvantagesDisadvantages Card Services Socket ServicesDisadvantage Card Services Enabler Card and Socket Services Versus Point EnablersSuper Client Drivers Autoset Mode Kit Contents InstallingInstallation Tips Installing the 3C389 PC Card1Attaching the Cable to the 3C389 PC Card Installing the 3C389 PC Card 3Modular UTP Cable for the 3C389 PC Card Connect the PC Card cable to the network portRemoving the 3C389 PC Card Turn on the power to the PCInstalling the Network Drivers Lanaid is not required to conﬁgure the following driversLanaid is required to conﬁgure the following drivers Windows 95 Installation Determine if you have OSR Set the displayed parametersFollow the instructions to copy the ﬁles Windows for Workgroups/NDIS 2 Installation Windows 95 OSR 2 InstallationWhen the driver is found, click Finish Set the parameters Follow the displayed instructions to copy the ﬁlesSee for information on how to use Lanaid Using Memory Management Windows NT 3.51 InstallationSet the displayed parameters and click OK Control Panel Window, double-click the Network iconClick the Adapters tab Click Add Windows NT 4.0 InstallationClick Install Novell NetWare Client 32 for Windows 95 InstallationClick OK when the Installation Complete message appears TypeClick Conﬁgure in the main menu Click OK when you have completed your selections for the NICDOS Client 16 for Novell NetWare 4.01 and Above Installation Start Mpts by performing either of the following actions Click OK on the Mpts logo panel Click Install Insert TokenDisk diskette #2 into the ﬂoppy drive and type IBM LAN Support Program/Native InstallationUsing Memory Management Lanaid Net Address IBM LAN ClientInstalling Lanaid Launch Lanaid Using Lanaid to Install IBM LAN ClientClient or Protocol Description IBM LAN Client Conﬁguration window appearsClick OK and click Close Click Suggest to have Lanaid suggest non-conﬂicting values Using Lanaid to Conﬁgure the 3C389 PC CardRunning Lanaid From the Command Line Click Exit to return to DOS Reboot your PCClick Done Troubleshooting 2CHAPTER 5 Troubleshooting OS/2 Ndis Error Codes Error CodesError Code Explanation and Action TOKENCS.COM Dxmcsmod Dxmcsmod Error CodesTroubleshooting Windows 95 Ndis If EMM386.EXE is in your CONFIG.SYS, comment it outClick the Resources tab of the dialog box Running the Diagnostics Program Troubleshooting Windows NT NdisSelect Properties Select the Adapter tab Test Options Initialization Error Codes Diagnostics Error Codes and Suggested ActionsOpen Error Codes Open ErrorsErrors PhasesSuggested Actions in Response to Open Errors Value MeaningError Code Explanation Action Error Code Explanation Action Running the Diagnostics Program Number Description Transmit Error CodesStrippedfs Memory Managers with Point Enabler Using a Memory ManagerFor compatibility mode Memory Managers with Card and Socket ServicesMemory Managers with Card and Socket Services IBM Card Services Phoenix Card ServicesExpanded Memory Speciﬁcation DEVICE=C\DOS\EMM386.EXE RAM 1024 X=D000-D1FF FRAME=C000 System Soft Card Socket Services SpecificsHOT-PLUGGABILITY and C SUSPEND/RESUME Windows 95 Ndis Click the 3C389 PC Card icon on the status barClick Stop DOS Ndis Hot-Pluggability DOS ODI Hot-Pluggability and Suspend/ResumeUnload all the drivers Remove the card from your machineOS/2 Ndis Hot-Pluggability and Suspend/Resume World Wide Web Site Online Technical Services3ComFacts Automated Fax Service 3Com Bulletin Board ServiceAccess by Analog Modem Access by Digital Modem3ComForum on CompuServe Online Service Log on to CompuServePress Return to see the 3ComForum main menu Support from Your Network Supplier Support from 3ComRegional Sales Office Telephone Number 3Com Corporation 3Com Benelux B.V Regional Sales Office Telephone Number 3Com Asia Limited3Com Canada 3Com European HQReturning Products for Repair Numbers IndexLanaid 3Com Corporation Limited Warranty FCC Class B Certification Statement Vcci Class 2 Statement United States Government Legend