3Com 3C389 manual DOS Client 16 for Novell NetWare 4.01 and Above Installation

Page 35

DOS Client 16 for Novell NetWare 4.01 and Above Installation

3-11

OS/2 NDIS 2 device driver using LAPS installation is complete when the following conditions exist:

■The device driver ﬁles load successfully and there are no error messages.

■You are able to log on and communicate with the network.

If you experience problems, go to Chapter 5, “Troubleshooting.”

DOS Client 16 for Novell NetWare 4.01 and Above Installation

1Insert the Novell 4.01 Diskette into the ﬂoppy disk drive.

2Type:

install [Enter]

Follow the steps on the panels as they appear.

3Record the client directory name in order to do a client installation.

The default directory name is C:\NWCLIENT.

4At the Insert the driver disk window, insert TokenDisk diskette #2 and type:

a:\novell\dos [Enter]

5Select Other drivers.

6Choose 3Com TokenLink Velocity PC Card.

7At the Settings for 3Com TokenLink Velocity PC Card window, press [Esc].

8At step 5, press [Enter] to ﬁnish installing NetWare.

9Press Enter to exit the installation tool.

10Conﬁgure the 3C389 PC Card.

11If LANAID is not already installed, install it as described in Chapter 4 in the section “Installing LANAID.”

Image 35

Contents TokenLink Velocity Token Ring LAN PC Card User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Lanaid and IBM LAN Client Using a Memory Manager Figures Tables Lifetime Limited Warranty Belgium, Netherlands, Luxembourg United Kingdom, Eire Asia JapanAustralia, New Zealand Sweden, Finland, Norway DenmarkIf you are looking for Turn to How to Use This GuideAbout this Guide Convention Description ConventionsIcon Alerts you to Introduction Product Features2CHAPTER 1 Introduction Pcmcia Disadvantages Point EnablersAdvantages Card Services Socket ServicesDisadvantage Super Client Drivers Card Services EnablerCard and Socket Services Versus Point Enablers Autoset Mode Installing the 3C389 PC Card InstallingKit Contents Installation Tips1Attaching the Cable to the 3C389 PC Card Installing the 3C389 PC Card 3Modular UTP Cable for the 3C389 PC Card Connect the PC Card cable to the network portRemoving the 3C389 PC Card Turn on the power to the PCLanaid is required to conﬁgure the following drivers Installing the Network DriversLanaid is not required to conﬁgure the following drivers Windows 95 Installation Follow the instructions to copy the ﬁles Determine if you have OSRSet the displayed parameters Follow the displayed instructions to copy the ﬁles Windows 95 OSR 2 InstallationWindows for Workgroups/NDIS 2 Installation When the driver is found, click Finish Set the parametersSee for information on how to use Lanaid Using Memory Management Windows NT 3.51 InstallationSet the displayed parameters and click OK Control Panel Window, double-click the Network iconClick the Adapters tab Click Add Windows NT 4.0 InstallationType Novell NetWare Client 32 for Windows 95 InstallationClick Install Click OK when the Installation Complete message appearsClick Conﬁgure in the main menu Click OK when you have completed your selections for the NICDOS Client 16 for Novell NetWare 4.01 and Above Installation Start Mpts by performing either of the following actions Click OK on the Mpts logo panel Click Install Insert TokenDisk diskette #2 into the ﬂoppy drive and type IBM LAN Support Program/Native InstallationUsing Memory Management Lanaid Net Address IBM LAN ClientInstalling Lanaid Launch Lanaid Using Lanaid to Install IBM LAN ClientClient or Protocol Description IBM LAN Client Conﬁguration window appearsClick OK and click Close Click Suggest to have Lanaid suggest non-conﬂicting values Using Lanaid to Conﬁgure the 3C389 PC CardClick Done Running Lanaid From the Command LineClick Exit to return to DOS Reboot your PC Troubleshooting 2CHAPTER 5 Troubleshooting OS/2 Ndis Error Codes Error CodesError Code Explanation and Action TOKENCS.COM Dxmcsmod Dxmcsmod Error CodesClick the Resources tab of the dialog box Troubleshooting Windows 95 NdisIf EMM386.EXE is in your CONFIG.SYS, comment it out Select Properties Select the Adapter tab Running the Diagnostics ProgramTroubleshooting Windows NT Ndis Test Options Initialization Error Codes Diagnostics Error Codes and Suggested ActionsOpen Error Codes Open ErrorsValue Meaning PhasesErrors Suggested Actions in Response to Open ErrorsError Code Explanation Action Error Code Explanation Action Running the Diagnostics Program Number Description Transmit Error CodesStrippedfs Memory Managers with Point Enabler Using a Memory ManagerFor compatibility mode Memory Managers with Card and Socket ServicesMemory Managers with Card and Socket Services Expanded Memory Speciﬁcation IBM Card ServicesPhoenix Card Services DEVICE=C\DOS\EMM386.EXE RAM 1024 X=D000-D1FF FRAME=C000 System Soft Card Socket Services SpecificsHOT-PLUGGABILITY and C SUSPEND/RESUME Click Stop Windows 95 NdisClick the 3C389 PC Card icon on the status bar Remove the card from your machine DOS ODI Hot-Pluggability and Suspend/ResumeDOS Ndis Hot-Pluggability Unload all the driversOS/2 Ndis Hot-Pluggability and Suspend/Resume World Wide Web Site Online Technical ServicesAccess by Digital Modem 3Com Bulletin Board Service3ComFacts Automated Fax Service Access by Analog ModemPress Return to see the 3ComForum main menu 3ComForum on CompuServe Online ServiceLog on to CompuServe Regional Sales Office Telephone Number 3Com Corporation Support from Your Network SupplierSupport from 3Com 3Com European HQ Regional Sales Office Telephone Number 3Com Asia Limited3Com Benelux B.V 3Com CanadaReturning Products for Repair Numbers IndexLanaid 3Com Corporation Limited Warranty FCC Class B Certification Statement Vcci Class 2 Statement United States Government Legend