Installing LANAID |
7Select one or more of the clients and protocols and click Continue.
The IBM LAN Client Configuration window appears.
Table
Client or Protocol | Description |
|
|
NETWARE CLIENT 32 | NetWare Client 32 is Novell’s version of client software. |
(IPX/SPX) | You cannot select both NetWare Client and DOS LAN |
| Services |
|
|
DOS LAN SERVICES | DLS is the DOS client software for IBM LAN and Warp |
(DLS) | servers. When you select DLS, you must provide the |
| following information: |
| User Name |
| Machine ID |
| Domain Name |
| When you select DLS, NetBIOS is automatically |
| selected as well. You cannot select both DLS and |
| NetWare Client |
|
|
NetBIOS | When you select NetBIOS, device driver parameters |
| cannot be set in LANAID. You can find |
| information about the NetBIOS device driver |
| parameters in LNCLIENT.TXT in the \LNCLIENT |
| subdirectory. |
|
|
IEEE 802.2 | Choose 802.2 when you are using the IEEE 802.2 |
| protocol on your LAN. When you select 802.2, driver |
| parameters cannot be set in LANAID. |
|
|
TCP/IP | This option is available under Windows or Windows for |
| Workgroups only. Choose TCP/IP when you are using |
| the TCP/IP protocol on your network. |
| When you select TCP/IP, you are required to select a |
| local IP address and default gateway. The local subnet |
| mask is set to 255.255.240.0 by default. |
|
|
8Enter the parameters for Install Options, Network Options and if appropriate, for TCP/IP or NetWare Client 32.
On the IBM LAN Client Configuration window, there are two or more folder tabs. The Install Options and NetWork Options folders always appear. The TCP/IP and NetWare Client 32 folders appear only when they are selected for in the IBM LAN Client IBM Installation window. Make sure that you enter all requested information.